Instruction manual SpeechLine Digital Wireless

SL Rack Receiver DW
77
Installing receivers in a rack
This chapter describes how to install a single receiver or two
receivers side by side in a rack.
You can also set up the receiver without installing it in a fixed
location. You can find more information about setting up the
receiver under: „Setting up the receiver“.
ATTENTION
Danger due to high temperature, mechanical loading or electric leakage currents
When rack mounted, a receiver can be damaged by excessive
heat or mechanical stress.
▷ Make sure that the temperature within the rack does not
exceed the permissible temperature limit specified in the
specifications.
▷ Make sure that the receivers in the rack are not subject to
mechanical stress.
▷ Make sure that circuits are not overloaded by providing
overcurrent protection if necessary.
▷ Make sure that the sum of the leakage currents of all power
supply units do not exceed the allowable limit values by
grounding the rack via an additional ground connection, if
necessary.