Instruction manual SpeechLine Digital Wireless
Table Of Contents
- SpeechLine Digital Wireless: System Information
- Focus on the spoken word
- The Products of the SpeechLine Digital Wireless Series
- Accessories
- SpeechLine Digital Wireless: System planning
- Planning
- Recommendations on antenna mounting
- Antenna setup and planning for SpeechLine Digital Wireless
- Antenna mounting options
- Option 1: Connecting the AWM 2 or AWM 4 antenna wall mount directly to the receiver(s)
- Option 2: Combining multiple links to one AWM 2/AWM 4
- Option 3: Rack mounting - front
- Option 4: Rack mounting - rear
- Further important information on antenna usage
- Multi-room mode
- SpeechLine Digital Wireless: Instruction manual
- SL Rack Receiver DW
- Product overview and operating elements – front panel
- Product overview and connections – rear panel
- Connecting the receiver
- Controlling and monitoring the receiver via the network
- Updating the firmware
- Setting up the receiver
- Installing receivers in a rack
- Displays on the receiver’s display panel
- Using the operating menu of the receiver
- SL MCR DW
- The SL Handheld DW
- The SL Bodypack DW
- The SL Tablestand 133-S DW
- The SL Tablestand 153-S DW
- The SL Boundary 114-S DW
- Pairing
- Performing a walk test (reception quality)
- The SL Headmic 1 headset microphone
- The MKE 1 clip-on microphone
- The CHG 2 charger
- The CHG 4N charger
- The CHG 2W charging base
- The AWM 2 antenna wall mount
- The AWM 4 antenna wall mount
- The SL PASC 2 passive antenna splitter/ combiner
- The SL PASC 4 passive antenna splitter/ combiner
SL Rack Receiver DW
88
The System Settings menu
The System Settings menu at menu level 1 allows you to ad-
just the following settings.
Display Brightness
• Level: Slider for adjusting the display brightness.
Mute Mode
• Active: The MUTE switch of the paired transmitter is acti-
vated and can be used.
• Deactivated: The MUTE switch of the paired transmitter is
deactivated and cannot be used.
• Push to talk: Press and hold the MUTE switch of the paired
transmitter to activate the audio signal (for SL Boundary
114-S DW and SL Tablestand 133/153-S DW only).
• Push to mute: Press and hold the MUTE switch of the paired
transmitter to mute the audio signal (for SL Boundary 114-S
DW and SL Tablestand 133/153-S DW only).
Auto Lock
• On: The automatic lock mode is activated. If no button is ac-
tuated on the receiver for approx. 10 seconds, the lock mode
is automatically activated.
• Long-press the jog dial to temporarily deactivate the lock
mode.
• Off: The automatic lock mode is deactivated.
RF Power
• Automatic: The transmission power is automatically adjust-
ed.
• Level 1 ... 5: The transmission power can be manually re-
duced in 5 steps. This function is required for operation in
Multi-Room Mode.