LSP 500 PRO Wireless Integrated PA System Bedienungsanleitung Instruction manual
Content Content Important safety instructions....................................................................................3 LSP 500 PRO..................................................................................................................6 Package contents..........................................................................................................7 Product overview..........................................................................................................
Important safety instructions Important safety instructions 1. Read this instruction manual. 2. Keep this instruction manual. Always include this instruction manual when passing the apparatus on to third parties. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Only clean the apparatus when it is not connected to the mains power supply. Clean only with a dry cloth. 7. Always ensure a free air flow around the cooling fins on the rear of the product.
Important safety instructions Hazard warnings on the rear of the product The label shown on the left is attached to the rear of the product. The symbols on this label have the following meaning: Presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute risk of electric shock. Never open the product – there is a risk of electric shock. There are no user serviceable parts inside. Refer servicing to an authorized Sennheiser service partner.
Important safety instructions Safety instructions for lithium-ion rechargeable batteries If abused or misused, rechargeable batteries may leak or be damaged. In extreme cases, they may even present • • • • an explosion hazard, a fire hazard, a heat hazard, a smoke or gas hazard. Only charge rechargeable batteries with the appropriate Sennheiser chargers. Dispose of rechargeable batteries at special collection points or return them to your specialist dealer. Observe correct polarity. Do not short-circuit.
LSP 500 PRO LSP 500 PRO The Sennheiser Group, with its headquarters in Germany, is one of the world‘s leading manufacturers of microphones, headphones and wireless transmission systems. We are shaping today the audio world of tomorrow – that is the ambition that we and our company live by from day to day. This vision statement describes what we are hoping to achieve together. The foundation for this is our history, our culture of innovation and our passion for excellence.
Package contents Package contents 1 1 2 6 1 1 1 1 LSP 500 PRO wireless integrated PA system mains cable LBA 500 battery packs rack mount “ears” for Sennheiser evolution wireless G3 devices dust cover quick guide safety guide CD-ROM A list of accessories can be found on the LSP 500 PRO product page at www.sennheiser.com and on page 61 in this instruction manual. For information on suppliers, contact your local Sennheiser partner: www.sennheiser.
Product overview Product overview 1 2 1 3 4 B A 5 C A Front view B Rear view 1 2 3 4 Carrying handle Expansion slots (from top to bottom: slot 1, slot 2, slot 3) Operating elements (see page 9) Battery compartments C Bottom view 5 Pole mount 8 | LSP 500 PRO
Operating elements Operating elements B 7 6 8 9 0 D B G H E I J K L M A CF 6 7 8 9 0 A B C D SLOT 1 / SLOT 2 / SLOT 3 input controls (jog dials) MASTER VOLUME control (jog dial) Display panel MENU control (jog dial) MIC input control (jog dial) MIC input (XLR-3F/¼“ (6.
Using the LSP 500 PRO Using the LSP 500 PRO Installing the LSP 500 PRO XX XX Place the product on a stable and horizontal surface. Install the product so that it is protected from moisture (rain) and direct sunlight. CAUTION Danger of injury and material damage due to incorrectly laid cables! XX Make sure that all cables to the product are laid so that no one can stumble over them and suffer injury or cause damage to the cables and the product.
Using the LSP 500 PRO Mains and battery operation The LSP 500 PRO can be mains or battery powered. When battery powered, the LSP 500 PRO uses only one of the two battery packs, allowing a discharged battery pack to be replaced during operation. The LSP 500 PRO automatically switches to the second battery pack when the first one is depleted. When replacing a battery pack during operation, observe the information on page 13.
Using the LSP 500 PRO Charging/replacing the battery packs To charge the battery packs: XX XX Insert the battery packs (see page 11). Connect the LSP 500 PRO to the mains power supply. The operation indicator K flashes, the charging process starts. When the battery packs are fully charged, the operation indicator lights up permanently. A complete charging cycle takes about 2.5 hours per battery pack when the product is switched off.
Using the LSP 500 PRO Important information on battery operation Replacing battery packs during operation When two battery packs are installed in the LSP 500 PRO and you want to replace one of the two battery pack during operation, make sure to only remove the battery pack that is not in use. Before removing a battery pack during operation: XX Check the LSP 500 PRO‘s display panel to see which battery pack is currently in use. For information on the battery charge status display, refer to page 16.
Using the LSP 500 PRO Switching the LSP 500 PRO on If the LSP 500 PRO is not connected to the mains power supply, it will be battery powered. For that to happen, the battery packs must be inserted and charged. To switch the LSP 500 PRO on: Set the POWER on/off switch L to position “ ”. XX The LSP 500 PRO switches on. The operation indicator K lights up green.
Using the LSP 500 PRO Basic operating functions The operating functions of the LSP 500 PRO are similar to those of a mixing console. Using the LSP 500 PRO‘s six jog dials, you can adjust the input volume of the corresponding input. The MASTER VOLUME jog dial 7 allows you to adjust the overall volume of the LSP 500 PRO. The MENU jog dial 9 allows you to operate the menu in order to configure the LSP 500 PRO.
Using the LSP 500 PRO Basic indications and functions shown on the display panel Status area The status area (highlighted in orange) on the right-hand side of the display panel indicates the battery charge status. Icon Explanation • The battery pack in use is depicted by the triangle. The triangle is animated and shows if the battery pack is being charged or in use (triangle pointing upwards battery pack is in use; triangle pointing downwards battery pack is being charged).
Using the LSP 500 PRO Additional indications in the status area The following additional icons can appear in the status area of the display panel: Icon Explanation Icon is displayed steadily: Bluetooth is activated and one device is paired. Icon is displayed flashing: Pairing mode is activated to allow Bluetooth devices to pair. WLAN is activated and the LSP 500 PRO is connected to a network.
Using the LSP 500 PRO Confirmation of stored settings Once you have adjusted a setting in the menu and stored it or when you have activated a function, the display panel displays STORED. Display time out Once you have finished adjusting settings in the menu, all open menu items are automatically closed and the display panels returns to the home screen. The USB player and the test sound menu are not affected by this and remain open.
Using the LSP 500 PRO Connection possibilities Expansion slots Label Icon Function SLOT 1 Expansion slot for installing a Sennheiser ew G3 device SLOT 2 Expansion slot for installing a Sennheiser ew G3 device SLOT 3 Expansion slot for installing a Sennheiser ew G3 device If you want to install a transmitter into the LSP 500 PRO, it is recommended to install it in SLOT 1 for mounting reasons.
Using the LSP 500 PRO Installing devices in the expansion slots The 3 expansion slots of the LSP 500 PRO allow you to install devices of the Sennheiser ew G3 series. Using the media control protocol of the ew G3 series If you operate the LSP 500 PRO from your tablet using the required app (see page 23), the integrated media control protocol of the installed ew G3 devices sends device status information to the app. For this to happen, a device needs to be detected only once after its installation.
Using the LSP 500 PRO Mounting the rack mount “ears” Unscrew and remove the 2 recessed head screws on each side of the receiver / transmitter. XX Secure the rack mount “ears” (supplied with the LSP 500 PRO) to the sides of the receiver / transmitter using the previously removed 4 recessed head screws. You require 2 rack mount “ears” per receiver / transmitter. XX Tighten the screws on the rack mount “ears” using a recessed head screwdriver (PH 2).
Using the LSP 500 PRO Connecting and installing a receiver / transmitter XX XX If necessary, remove the rubber feet from the receiver / transmitter. Connect the cable of the corresponding expansion slot to the receiver / transmitter. The cables of the expansion slots are labeled to ensure proper connection andd installation. The network plugs (RJ 45) are universal and are not labeled. If you install a stereo transmitter (e.g. Sennheiser SR 300 IEM G3), you have to set the transmitter to mono operation.
Operating the LSP 500 PRO via a tablet Operating the LSP 500 PRO via a tablet The optionally available “LSP 500 PRO” app allows you to operate the LSP 500 PRO from your tablet. The app turns your tablet into a mobile mixing console and allows you to adjust the settings of an individual LSP 500 PRO and to also adjust common settings for several LSP 500 PRO at the same time. The app supports the operation of up to 20 LSP 500 PRO simultaneously.
Operating the LSP 500 PRO via a tablet Information on using the app The app is available in the following languages: English, German, French, Italian, Spanish, Dutch and Russian. The app opens automatically in the language you have set up for your tablet. If the operating system on your tablet uses a language that is not supported by the app, the app opens in English. “Positioning” screen After opening the app, it will show all the LSP 500 PRO available in the network.
Operating the LSP 500 PRO via a tablet “Edit box” screen If you tap on an individual box on the “Positioning” screen, you can configure the selected LSP 500 PRO. The following screen appears: “Mixing Panel” screen The “Mixing Panel” screen shows a summary of all activated inputs of all boxes. You can activate a total of 7 inputs. The “Mixing Panel” screen allows you to configure the activated inputs.
Operating the LSP 500 PRO via a tablet Selecting several boxes On the “Positioning” screen, you can either tap on “Select all” to simultaneously select all boxes or you can tap on “Select multiple” to simultaneously select certain boxes. Adjusting common settings for several boxes If you have selected several boxes on the previous screen, you can adjust common settings for the selected boxes by tapping on “Edit” in the upper right corner of the screen.
Operating the LSP 500 PRO via a tablet Equalizer You can operate the equalizer of the LSP 500 PRO via the app. Compressor You can operate the compressor of the LSP 500 PRO via the app.
The operating menu The operating menu Menu structure This overview shows the structure and functions of the LSP 500 PRO‘s menu which can be operated using the MENU jog dial.
The operating menu To call up the operating menu: XX When the home screen is displayed, turn the MENU jog dial to the left or right to browse up or down through the operating menu. The menu items are displayed as follows: The opened menu level or menu item is shown at the bottom left of the display panel. The ESC function allows you to return to the previous menu level.
The operating menu Master Master EQ The master EQ allows you to configure the overall signal of the LSP 500 PRO. The master EQ is a semiparametric 3-band equalizer. XX Turn the MENU jog dial to switch the master EQ on or off.
The operating menu EQ presets for the inputs EQ On/Off Switching an input EQ on or off To switch an input equalizer on or off: Select the desired input in the EQUALIZER menu and turn the MENU jog dial until the EQ ON/OFF menu item is displayed. XX Press the MENU jog dial to open the EQ ON/OFF menu item. XX XX XX Turn the MENU jog dial to choose between ON and OFF. Press the MENU jog dial to activate your selection and to switch the input EQ on or off.
The operating menu Low Cut Activating the low-cut filter To suppress unwanted noise such as, e.g., impact noise, you can activate a low-cut filter for the inputs SLOT 1, SLOT 2, SLOT 3 and MIC. To switch the low-cut for an input on or off: Select the desired input in the EQUALIZER menu and turn the MENU jog dial until the LOW CUT menu item is displayed. XX Press the MENU jog dial to open the LOW CUT menu item. XX Turn the MENU jog dial to switch the low-cut filter on or off.
The operating menu Press the MENU jog dial to open the compressor for the selected input. XX Turn the MENU jog dial to switch the compressor for the selected input on or off. XX Display example when compressor is switched off Display example when compressor is switched on The dotted area in the TH slider displays the level of the audio signal.
The operating menu Menu Delay Delay To open the delay function: At the first menu level, turn the MENU jog dial until the DELAY menu item is displayed. XX Press the MENU jog dial to open the DELAY menu item. XX 34 | LSP 500 PRO XX Turn the MENU jog dial to adjust a delay value. The delay can be adjusted in the range from 0 to 34 m (0 to 112 ft), in steps of 0.2 m (0.5 ft). XX Press the MENU jog dial to store the adjusted value.
The operating menu Menu USB Player USB player The USB player allows you to playback audio files or to record the audio signal of the LSP 500 PRO. All USB storage devices that are to be connected to the LSP 500 PRO have to comply with the following requirements.
The operating menu Playback mode Display example when USB player is in playback mode Display example when USB player is in playback mode and during playback Using the USB player in playback mode Jog dial Action Icon Function MENU Returns to the home screen SLOT 1 Selects a playback option: Random Sequence Single track SLOT 2 Repeat function activated Repeat function deactivated SLOT 3 Changes to recording mode MIC Short press: jumps to the previous track Long press: rewinds the track AUX I
The operating menu Recording mode Display example when USB player is in recording mode Display example when USB player is in recording mode and during recording The time display on the display panel indicates the remaining recording time left on the storage device.
The operating menu Menu Bluetooth Bluetooth Via the Bluetooth menu, you can pair a mobile device (e.g. smartphone, tablet) with the LSP 500 PRO in order to be able to play audio files. The LSP 500 PRO supports the A2DP protocol (SBC and aptX®). To open the Bluetooth menu: At the first menu level, turn the MENU jog dial until the BLUETOOTH menu item is displayed. XX Press the MENU jog dial to open the BLUETOOTH menu item. XX XX XX Volume Turn the MENU jog dial to choose between PAIRING and VOLUME.
The operating menu Pairing Pairing Bluetooth devices To pair a Bluetooth device with the LSP 500 PRO: XX XX Open the pairing menu item. Turn the MENU jog dial to choose between OFF and PAIR. Press the MENU jog dial to activate your selection. XX Select OFF to cancel pairing or to end an existing Bluetooth connection. XX Select PAIR to pair a Bluetooth device with the LSP 500 PRO: Pairing mode is activated. PAIRING NOW appears on the display panel and the Bluetooth icon flashes in the status area.
The operating menu Menu Settings Settings The SETTINGS menu allows you to adjust the LSP 500 PRO settings. To open the settings menu: At the first menu level, turn the MENU jog dial until the SETTINGS menu item is displayed. XX Press the MENU jog dial to open the SETTINGS menu item. XX The SETTINGS menu contains all the options and functions necessary for configuring the LSP 500 PRO. Menu Settings Test Sound Test sound You can play a test sound to check the acoustic function of the LSP 500 PRO.
The operating menu Menu Settings Daisy Chain Configuring the signal output to additional devices You can send the signal of the LSP 500 PRO to one or several LSP 500 PRO – either wired via the LINK OUT XLR output or wirelessly via a transmitter installed in the SLOT 1 expansion slot. Via the LINK OUT output, you can also send the signal to an active subwoofer. To configure the signal output: In the SETTINGS menu, turn the MENU jog dial until the DAISY CHAIN menu item is displayed.
The operating menu Menu Settings Display Brightness Display brightness To adjust the display brightness: In the SETTINGS menu, turn the MENU jog dial until the DISPLAY BRIGHTNESS menu item is displayed. XX Press the MENU jog dial to open the DISPLAY BRIGHTNESS menu item. XX Turn the MENU jog dial to adjust the display brightness. XX Press the MENU jog dial to store your setting.
The operating menu To open the WLAN menu: In the SETTINGS menu, turn the MENU jog dial until the WLAN menu item is displayed. XX Press the MENU jog dial to open the WLAN menu item. XX On/Off Switching the WLAN function of the LSP 500 PRO on or off In the WLAN menu, turn the MENU jog dial until the WLAN ON/OFF menu item is displayed. XX Press the MENU jog dial to open the WLAN ON/OFF menu item. XX Turn the MENU jog dial to choose between ON and OFF.
The operating menu IP Mode Selecting the assignment mode for the IP address and the IP subnet mask The IP address and the subnet mask of the LSP 500 PRO can be assigned automatically or statically. If address assignment is static, you can enter the IP address and the IP subnet mask yourself and change them. If address assignment is automatic, you cannot change the IP address and the IP subnet mask.
The operating menu IP Address AUTO assignment mode Displaying and changing the IP address To display the IP address when AUTO is the selected assignment mode: In the WLAN menu, turn the MENU jog dial until the IP ADDRESS menu item is displayed. XX Press the MENU jog dial to open the IP ADDRESS menu item. The IP address is displayed. XX XX FIX assignment mode Press the MENU jog dial to return to the previous menu level.
The operating menu IP Net Mask AUTO assignment mode Displaying and changing the IP subnet mask To display the IP subnet mask when AUTO is the selected assignment mode: In the WLAN menu, turn the MENU jog dial until the IP NETMASK menu item is displayed. XX Press the MENU jog dial to open the IP NETMASK menu item. The IP subnet mask is displayed. XX XX FIX assignment mode Press the MENU jog dial to return to the previous menu level.
The operating menu SSID List Selection Selecting a network and connecting the LSP 500 PRO to the selected network To select a wireless network and to connect the LSP 500 PRO to the selected network: In the WLAN menu, turn the MENU jog dial until the SSID LIST SELECTION menu item is displayed. XX Press the MENU jog dial to open the SSID LIST SELECTION menu item. XX The available networks are shown on the display panel. Encrypted networks are marked with a lock icon.
The operating menu SSID Entry Manually entering a network name When a network is hidden, but you know its name, you can manually enter the network name to connect to this network. In the WLAN menu, turn the MENU jog dial until the SSID ENTRY menu item is displayed. XX Press the MENU jog dial to open the SSID ENTRY menu item.
The operating menu WPA2 Key Entering a network key If you want to connect the LSP 500 PRO to a WPA2-encrypted wireless network, you have to select the network (see page 47) and then enter the network key. To enter the network key: In the WLAN menu, turn the MENU jog dial until the WPA2 KEY menu item is displayed. XX Press the MENU jog dial to open the WPA2 KEY menu item.
The operating menu Menu Settings MIC Configuring the MIC input You can reduce the input sensitivity of the MIC input by 20 dB. If you are using a condenser microphone, you can also activate the phantom power. To open the configuration menu for the MIC input: In the Settings menu, turn the MENU jog dial until the MIC menu item is displayed. XX Press the MENU jog dial to open the MIC menu item.
The operating menu Menu Settings Device Detection Detecting devices in the expansion slots The Sennheiser devices of the ew 300 G3 and ew 500 G3 series feature a media control protocol. The media control protocol sends, among other things, information on the battery and mute status of the associated transmitters and on the names of the individual devices to the app.
The operating menu Menu Settings Reset Resetting the settings You can either reset all settings of the LSP 500 PRO to the factory defaults (FACTORY RESET) or you can reset only the audio settings (AUDIO RESET). In the Settings menu, turn the MENU jog dial until the reset menu item is displayed. XX Press the MENU jog dial to open the RESET menu item. XX 52 | LSP 500 PRO XX Turn the MENU jog dial to choose between NO, AUDIO and ALL. XX Press the MENU jog dial to activate your selection.
The operating menu Menu Service Service The service menu allows you to retrieve system information and to update the firmware of the LSP 500 PRO. To open the service menu: At the first menu level, turn the MENU jog dial until the SERVICE menu item is displayed. XX Press the MENU jog dial to open the SERVICE menu item. XX Menu Service System Info System information Via this menu item, you can display information on the 2 battery packs and on the current firmware version of the LSP 500 PRO.
The operating menu Menu Service Maintenance Updating the firmware To update the firmware of the LSP 500 PRO: XX Prepare a USB flash drive (FAT 32 formatting) that contains the new firmware. XX Connect the LSP 500 PRO to the mains power supply. XX Connect the USB flash drive containing the new firmware to the USB port of the LSP 500 PRO. XX Open the SERVICE menu. XX Open the MAINTENANCE menu item. XX Open the FIRMWARE UPDATE menu item. XX Press the USB jog dial to start the firmware update.
Cleaning and maintaining the LSP 500 PRO Cleaning and maintaining the LSP 500 PRO Cleaning CAUTION Damage to the product caused by liquids! Liquids entering the product can short-circuit the electronics or damage the mechanics. Solvents or cleansing agents can damage the surface of the product. XX Keep all liquids away from the product. XX Do not use any solvents or cleansing agents. Before cleaning, switch the LSP 500 PRO off and disconnect it from the mains power supply.
If a problem occurs ... If a problem occurs ... Problem Possible cause The LSP 500 PRO cannot be switched on and the green operation indicator does not light up No battery packs are inserted; Insert/replace the battery the battery packs are depleted. packs. page 11 The mains cable is not connected. Connect the mains cable. page 11 The LSP 500 PRO‘s automatic charging system does not function.
If a problem occurs ... Problem Possible cause Possible solution See Only the left channel of the stereo signal is heard The Right Link mode is activated. Check the signal output configuration. page 41 A loud whistling sound or feed- The distance between microback is heard phone and LSP 500 PRO is too short. Increase the distance between microphone and LSP 500 PRO. The gain reduction of the compressor is set too high. Adjust the gain reduction of the compressor.
If a problem occurs ... Error and warning messages on the display of the LSP 500 PRO Indications on the display panel 58 | LSP 500 PRO Meaning Possible solution See Lock mode is activated Deactivate the lock mode. page 18 Battery charge status < 21% Replace the battery pack; connect the LSP 500 PRO to the mains power supply. page 11 Battery charge status < 6% Replace the battery pack; connect the LSP 500 PRO to the mains power supply.
Specifications Specifications Housing Dimensions (W x H x D) Housing material Front Bottom Handle Pole mount Weight (without expansion devices, with battery packs) 290 x 550 x 320 mm (11.42" x 21.65" x 12.60") crosswise glued plywood sealed with polyurethane coating, black acoustic foam, black plastic base plate with rubber feet integrated carrying handle with plastic coating 36 mm (1.42 “) tiltable to +/- 13.5° in steps of 4.5° approx. 13.6 kg (30.0 lb.
Specifications Power supply Mains voltage / mains frequency Battery packs Battery voltage / nominal charge Operating time Charging time 100 to 240 V~, 50/60 Hz 2x Sennheiser LBA 500, Li-Ion 14.4 V / 4.4 Ah approx. 6 h (speech) (approx. 3 h per battery pack) approx. 5 h (approx. 2.
Accessories Accessories The following accessories for the LSP 500 PRO are available: • • • • LAS 500 slip cover LAP 500 protective cover LAB 500 trolley bag LBA 500 battery pack Recommended accessories for the expansion slots: • Devices of the Sennheiser ew G3 series LSP 500 PRO | 61
Manufacturer Declarations Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer Declarations FCC This device complies with part 15 of the FCC Rules and RSS Standards. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Publ.
