Instruction manual ew IEM G4
Installing the SR IEM G4
32
Mounting a single transmitter in a rack
To mount the transmitter in a rack, you will need the GA 3 rack mounting
kit (optional accessory).
To fasten the mounting angle of the GA 3 rack mounting kit:
▷ Unscrew and remove the two recessed head screws (M4x8) on each
side of the transmitter.
▷ Secure the left and right mounting angles to the sides of the transmitter
using the previously removed recessed head screws.
►
▷ Secure the blanking plate to one of the mounting angles using two re-
cessed head screws (M6x10).