Instruction manual ew IEM G4
Using the SR IEM G4
85
Deactivating the RF signal (RF mute)
To deactivate the RF signal:
▷ Press the STANDBY button.
RF Mute Off? appears in the display panel.
▷ Turn the jog dial.
RF Mute ON? appears in the display panel.
▷ Press the jog dial.
The transmission frequency is displayed, however the transmitter is
not transmitting an RF signal. The RF Mute warning appears (see “Dis-
plays on the SR IEM G4 display panel”) and the LED warnings are illu-
minated (see “Operating elements of the SR IEM G4 transmitter”).
To activate the RF signal:
▷ Press the STANDBY button.
RF Mute Off? appears in the display panel.
▷ Turn the jog dial.
RF Mute ON? appears in the display panel.
▷ Press the jog dial.
The warning in the display and the LED warnings go out.