user manual

Using the Set 830 S

Searching for a sound source

왘 Switch the receiver on.

Do you hear the desired sound source?

Yes: The receiver has already found the sound source.

왘 If you still haven’t found your sound source, press the

channel search button once more.

You cannot find your sound source?

왘 Read the chapter “If a problem occurs ...” on page 23.

Note:

The channel indicator  goes off after 30 seconds so

that the light won’t disturb you in a dark room.

Adjusting the balance

No:

왘 Briefly press the channel search

button

The sound source is searched for.

On the receiver, the channel indi-

cator 1 can light up as follows:

Channel

indicator

Frequency You hear

the sound in

2.3+2.8 MHz stereo

2.3 MHz

mono

2.8 MHz

The balance control allows for right/left

volume adjustment. Adjust the balance

so that you hear equally well with both

ears.

왘 Turn the balance control 4 to the

left L or right R in order to increase the

volume for the corresponding ear.