XS Wireless 1 | XS Wireless 2 Instruction Manual Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com XSW 1 | XSW 2 - v1.
PRODUCT INFORMATION 4 Products of the XS Wireless line 4 EM-XSW 1 stationary receiver 5 EM-XSW 1 DUAL rack receiver 5 EM-XSW 2 stationary receiver 6 SKM 825-XSW handheld transmitter 7 SKM 835-XSW handheld transmitter 8 SKM 865-XSW handheld transmitter 9 SK-XSW bodypack transmitter 10 Available sets 11 XSW 1-825 | Vocal Set 11 XSW 1-835 | Vocal Set 12 XSW 1-825 DUAL | Vocal Set 13 XSW 1-835 DUAL | Vocal Set 14 XSW 1-CI1 | Instrument Set 15 XSW 1-908 | Instrument Set 16 XSW 1-ME2 | Lavalier Set 17 XSW 1-ME
Front 41 Back 42 Connecting/disconnecting the receiver to/from the power supply system 43 Outputting audio signals 44 Switching the receiver on and off 45 Information on the receiver’s display 46 Setting options on the front of the device 48 Navigation buttons 48 Setting the frequency automatically (AUTO SCAN) 48 Setting the frequency manually 50 Adjusting the volume of the audio outputs 52 Setting options on the rear of the device 53 Selecting the signal type (Mic/Line) 53 Setting the squelch 53 Configurin
SK-XSW bodypack transmitter 81 Product overview 81 Inserting and removing the batteries 82 Battery status 83 Connecting a microphone to the bodypack transmitter 84 Connecting an instrument or line source to the bodypack transmitter 84 Switching the bodypack transmitter on and off 86 Establishing a connection to the receiver 86 Information on the bodypack transmitter’s display 87 Further information 87 Setting the input sensitivity 88 Muting the bodypack transmitter 89 Establishing a radio link | Synchroni
PRODUCT INFORMATION PRODUCT INFORMATION Products of the XS Wireless line ► For information about the available accessories, see „Accessories“. For information about the available sets, see „Available sets“. For information about the frequency ranges, see „Frequency ranges“. You can find technical specifications for the series and the individual products under „SPECIFICATIONS“.
Products of the XS Wireless line EM-XSW 1 stationary receiver ► You can find more detailed information about the EMXSW 1 in the following sections: Startup and operation: „EM-XSW 1 rack receiver“ ▷ Specifications: „EM-XSW 1 stationary receiver“ ▷ EM-XSW 1 DUAL rack receiver ► You can find more detailed information about the EMXSW 1 DUAL in the following sections: Startup and operation: „EM-XSW 1 DUAL rack receiver“ ▷ Specifications: „EM-XSW 1 DUAL rack receiver“ ▷ 5
Products of the XS Wireless line EM-XSW 2 stationary receiver ► You can find more detailed information about the EMXSW 2 in the following sections: Startup and operation: „EM-XSW 2 rack receiver“ ▷ Specifications: „EM-XSW 2 stationary receiver“ ▷ 6
Products of the XS Wireless line SKM 825-XSW handheld transmitter ► Handheld transmitter with e825 microphone capsule You can find more detailed information about the SKMXSW in the following sections: Startup and operation: „Handheld transmitters SKM 825XSW | SKM 835-XSW | SKM 865-XSW“ ▷ Specifications: „SKM-XSW handheld transmitter“ ▷ 7
Products of the XS Wireless line SKM 835-XSW handheld transmitter ► Handheld transmitter with e835 microphone capsule You can find more detailed information about the SKMXSW in the following sections: Startup and operation: „Handheld transmitters SKM 825XSW | SKM 835-XSW | SKM 865-XSW“ ▷ Specifications: „SKM-XSW handheld transmitter“ ▷ 8
Products of the XS Wireless line SKM 865-XSW handheld transmitter ► Handheld transmitter with e865 microphone capsule You can find more detailed information about the SKMXSW in the following sections: Startup and operation: „Handheld transmitters SKM 825XSW | SKM 835-XSW | SKM 865-XSW“ ▷ Specifications: „SKM-XSW handheld transmitter“ ▷ 9
Products of the XS Wireless line SK-XSW bodypack transmitter ► You can find more detailed information about the SKXSW in the following sections: Startup and operation: „SK-XSW bodypack transmitter“ ▷ Specifications: „SK-XSW bodypack transmitter“ ▷ 10
Available sets Available sets XSW 1-825 | Vocal Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SKM 825-XSW handheld transmitter“ MZQ 1 microphone clamp Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 1-835 | Vocal Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SKM 835-XSW handheld transmitter“ MZQ 1 microphone clamp Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 1-825 DUAL | Vocal Set ► The set consists of the following components: • • • • • „EM-XSW 1 DUAL rack receiver“ 2x „SKM 825-XSW handheld transmitter“ 2x MZQ 1 microphone clamp Power supply with country adapters 4 AA LR6 batteries, 1.
Available sets XSW 1-835 DUAL | Vocal Set ► The set consists of the following components: • • • • • „EM-XSW 1 DUAL rack receiver“ 2x „SKM 835-XSW handheld transmitter“ 2x MZQ 1 microphone clamp Power supply with country adapters 4 AA LR6 batteries, 1.
Available sets XSW 1-CI1 | Instrument Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SK-XSW bodypack transmitter“ CI 1 instrument cable Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 1-908 | Instrument Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SK-XSW bodypack transmitter“ e 908T instrument microphone Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 1-ME2 | Lavalier Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SK-XSW bodypack transmitter“ ME 2 lavalier microphone Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 1-ME3 | Headmic Set ► The set consists of the following components: • • • • • „EM-XSW 1 stationary receiver“ „SK-XSW bodypack transmitter“ ME 3 headset microphone Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 2-835 | Vocal Set ► The set consists of the following components: • • • • • • „EM-XSW 2 stationary receiver“ „SKM 835-XSW handheld transmitter“ MZQ 1 microphone clamp Rack mount kit Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 2-865 | Vocal Set ► The set consists of the following components: • • • • • • „EM-XSW 2 stationary receiver“ „SKM 865-XSW handheld transmitter“ MZQ 1 microphone clamp Rack mount kit Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 2-CI1 | Instrument Set ► The set consists of the following components: • • • • • • „EM-XSW 2 stationary receiver“ „SK-XSW bodypack transmitter“ CI 1 instrument cable Rack mount kit Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 2-ME2 | Lavalier Set ► The set consists of the following components: • • • • • • „EM-XSW 2 stationary receiver“ „SK-XSW bodypack transmitter“ ME 2 lavalier microphone Rack mount kit Power supply with country adapters 2 AA LR6 batteries, 1.
Available sets XSW 2-ME3 | Headmic Set ► The set consists of the following components: • • • • • • „EM-XSW 2 stationary receiver“ „SK-XSW bodypack transmitter“ ME 3 headset microphone Rack mount kit Power supply with country adapters 2 AA LR6 batteries, 1.
Accessories Accessories GA 1-XSW 2 rack mount kit 19" rack adapter for mounting the EM-XSW 2 in a 19" rack. Art. no. 507351 ► GA 2-XSW 2 antenna front mount kit Antenna front mount kit for installing antenna connections on the front of the rack when using the EM-XSW 2 together with the GA 1-XSW 2 rack mount kit. Art. no.
Frequency ranges Frequency ranges The products are available in the following frequency ranges. Click a frequency range in the list to open a frequency table with factory presets for this frequency range. ► ► ► ► ► ► ► ► ► ► ► Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.
INSTRUCTION MANUAL INSTRUCTION MANUAL Starting up and operating devices of the XS Wireless line „EM-XSW 1 rack receiver“ „EM-XSW 1 DUAL rack receiver“ „EM-XSW 2 rack receiver“ 26
Starting up and operating devices of the XS Wireless line ► „Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW“ ► „SK-XSW bodypack transmitter“ ► „Establishing a radio link | Synchronizing the receiver and transmitter“ ► „Cleaning and maintenance“ 27
EM-XSW 1 rack receiver EM-XSW 1 rack receiver Connectors and controls Front 1 Display for status information • See „Information on the receiver’s display“ 2 Control buttons for selecting channels and adjusting volume • See „Setting options on the front of the device“ 3 SYNC button for synchronizing the transmitter and receiver • See „Establishing a radio link | Synchronizing the receiver and transmitter“ 4 ON/OFF button for switching the device on and off • See „Switching the receiver on and off“ 28
EM-XSW 1 rack receiver Back 5 XLR-3 socket for Balanced audio output • See „Outputting audio signals“ 6 6.
EM-XSW 1 rack receiver Connecting/disconnecting the receiver to/ from the power supply system Only use the supplied power supply unit. It is designed for your receiver and ensures safe operation. To connect the receiver to the power supply system: ▷ Pass the cable of the power supply unit through the strain relief. ▷ Insert the plug of the power supply unit into the Power socket on the receiver. ▷ Slide the supplied country adapter onto the power supply unit.
EM-XSW 1 rack receiver Outputting audio signals The EM-XSW 1 has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket. ▷ Always use only one of the two output sockets. To connect an XLR cable: ▷ Plug the XLR cable into the Balanced socket on the EMXSW 1. To connect a jack cable: ▷ Plug the jack cable into the Unbalanced socket on the EMXSW 1. ▷ Set the Line/Mic switch to the desired position.
EM-XSW 1 rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver to standby mode: ▷ Hold down the ON/OFF button until the display switches off. To switch the receiver off completely: ▷ Disconnect the receiver from the power supply system by unplugging the power supply unit from the wall socket.
EM-XSW 1 rack receiver Information on the receiver’s display Status information such as frequency, reception quality, battery status and audio level is shown on the display. Sensitivity: Indicates the sensitivity of the connected transmitter • SKM: „Setting the input sensitivity“ • SK: „Setting the input sensitivity“ RF: If the antenna symbol is displayed, the radio link is active.
EM-XSW 1 rack receiver Battery: Battery status of the connected transmitter • SKM: „Inserting and removing the batteries“ • SK: „Inserting and removing the batteries“ Bank/Channel: Frequency bank and channel of the radio link • „Setting options on the front of the device“ 34
EM-XSW 1 rack receiver Setting options on the front of the device Navigation buttons Use the following buttons to navigate through the receiver’s settings. ► Setting the frequency automatically (AUTO SCAN) Performs an automatic frequency scan of your area. This enables you to easily find and assign free radio frequencies. ▷ Switch off all transmitters before you perform the scan.
EM-XSW 1 rack receiver The scan starts automatically. An open channel is then shown in the display (e.g. bank 2, channel 3). ► ► ▷ Press the SET/SCAN button to accept the displayed channel. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see „Establishing a radio link | Synchronizing the receiver and transmitter“). Setting the frequency manually ▷ Press the SET/SCAN button.
EM-XSW 1 rack receiver ▷ Press the CH+/CH- buttons to select a frequency bank (1 to 8). ► Press the SET/SCAN button to accept the selected frequency bank. ▷ Press the CH+/CH- buttons to select a channel (0 to 9) in the selected frequency bank. The selected bank and channel are shown in the display (e.g. bank 2, channel 3). ▷ ► ► ▷ Press the SET/SCAN button to accept the selected channel.
EM-XSW 1 rack receiver Adjusting the volume of the audio outputs Use the VOL+/VOL- buttons to set the level of the audio signal coming from the receiver’s audio outputs (Balanced/Unbalanced). This audio signal can be output to a mixing console or an amplifier, for example. ▷ Press the VOL+/VOL- buttons to adjust the volume. ► ▷ Make sure that the signal in the next device in the signal chain (e.g. mixing console, power amplifier, guitar amplifier, etc.) is not overdriven.
EM-XSW 1 rack receiver Setting options on the rear of the device Selecting the signal type (Mic/Line) ▷ Set the Line/Mic switch to the desired position. • Line: when using instruments or other line sources with the SK-XSW bodypack transmitter • Mic: when using the SKM-XSW handheld transmitter or a microphone with the SK-XSW bodypack transmitter Setting the squelch The squelch function can be used to suppress disturbing noise during transmission, such as hiss.
EM-XSW 1 rack receiver Configuring a multi-channel system Please note when creating multi-channel systems: Only the factory-preset transmission frequencies within one frequency bank are intermodulation-free. Set the same channel bank for all receivers. ▷ Assign one channel from this channel bank to each receiver. ▷ We recommend using the AUTO SCAN function, as this is the most reliable way to identify free frequencies (see „Setting the frequency automatically (AUTO SCAN)“).
EM-XSW 1 DUAL rack receiver EM-XSW 1 DUAL rack receiver Connectors and controls The EM-XSW 1 DUAL two-channel receiver is essentially two individual EM-XSW 1 receivers in one housing. Each of the two receiver channels has separate connectors and setting options.
EM-XSW 1 DUAL rack receiver Back 5 XLR-3 socket for Balanced audio output • For each of the two channels • See „Outputting audio signals“ 6 6.
EM-XSW 1 DUAL rack receiver Connecting/disconnecting the receiver to/ from the power supply system Only use the supplied power supply unit. It is designed for your receiver and ensures safe operation. To connect the receiver to the power supply system: ▷ Pass the cable of the power supply unit through the strain relief. ▷ Insert the plug of the power supply unit into the Power socket on the receiver. ▷ Slide the supplied country adapter onto the power supply unit.
EM-XSW 1 DUAL rack receiver Outputting audio signals Each of the two channels on the EM-XSW1 DUAL has both a balanced XLR-3M output socket and an unbalanced 6.3 mm (1/4") jack output socket. The EM-XSW 1 has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket. ▷ Always use only one of the two output sockets for each channel. ► To connect an XLR cable: ▷ Plug the XLR cable into the Balanced socket for the respective channel on the EM-XSW 1 DUAL.
EM-XSW 1 DUAL rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver to standby mode: ▷ Hold down the ON/OFF button until the display switches off. To switch the receiver off completely: ▷ Disconnect the receiver from the power supply system by unplugging the power supply unit from the wall socket.
EM-XSW 1 DUAL rack receiver Information on the receiver’s display Status information such as frequency, reception quality, battery status and audio level is shown on the display for each of the two channels. Sensitivity: Indicates the sensitivity of the connected transmitter • SKM: „Setting the input sensitivity“ • SK: „Setting the input sensitivity“ RF: If the antenna symbol is displayed, the radio link is active.
EM-XSW 1 DUAL rack receiver Sync: „Establishing a radio link | Synchronizing the receiver and transmitter“ Battery: Battery status of the connected transmitter • SKM: „Inserting and removing the batteries“ • SK: „Inserting and removing the batteries“ Bank/Channel: Frequency bank and channel of the radio link • „Setting options on the front of the device“ 47
EM-XSW 1 DUAL rack receiver Setting options on the front of the device Navigation buttons Use the following buttons to navigate through the receiver’s settings. ► Setting the frequency automatically (AUTO SCAN) Performs an automatic frequency scan of your area. This enables you to easily find and assign free radio frequencies. ▷ Switch off all transmitters before you perform the scan.
EM-XSW 1 DUAL rack receiver ▷ Press the SET/SCAN button for approx. 3 seconds. ► The scan starts automatically. An open channel is then shown in the display (e.g. bank 2, channel 3). ► ► ▷ Press the SET/SCAN button to accept the displayed channel. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see „Establishing a radio link | Synchronizing the receiver and transmitter“).
EM-XSW 1 DUAL rack receiver Setting the frequency manually ▷ Press the SET/SCAN button. ► ▷ Press the CH+/CH- buttons to select a frequency bank (1 to 8). ► ▷ Press the SET/SCAN button to accept the selected frequency bank.
EM-XSW 1 DUAL rack receiver ▷ Press the CH+/CH- buttons to select a channel (0 to 9) in the selected frequency bank. The selected bank and channel are shown in the display (e.g. bank 2, channel 3). ► ► ▷ Press the SET/SCAN button to accept the selected channel. If you have set a new frequency, you must still synchronize the receiver with the transmitter to establish the radio link (see „Establishing a radio link | Synchronizing the receiver and transmitter“).
EM-XSW 1 DUAL rack receiver Adjusting the volume of the audio outputs Use the VOL+/VOL- buttons to set the level of the audio signal coming from the receiver’s audio outputs (Balanced/Unbalanced). This audio signal can be output to a mixing console or an amplifier, for example. ▷ Press the VOL+/VOL- buttons to adjust the volume. ► ▷ Make sure that the signal in the next device in the signal chain (e.g. mixing console, power amplifier, guitar amplifier, etc.) is not overdriven.
EM-XSW 1 DUAL rack receiver Setting options on the rear of the device Selecting the signal type (Mic/Line) ▷ Set the Line/Mic switch to the desired position for each of the two channels. • Line: when using instruments or other line sources with the SK-XSW bodypack transmitter • Mic: when using the SKM-XSW handheld transmitter or a microphone with the SK-XSW bodypack transmitter Setting the squelch The squelch function can be used to suppress disturbing noise during transmission, such as hiss.
EM-XSW 1 DUAL rack receiver Configuring a multi-channel system Please note when creating multi-channel systems: Only the factory-preset transmission frequencies within one frequency bank are intermodulation-free. Set the same channel bank for all receivers. ▷ Assign one channel from this channel bank to each receiver. ▷ We recommend using the AUTO SCAN function, as this is the most reliable way to identify free frequencies (see „Setting the frequency automatically (AUTO SCAN)“).
EM-XSW 2 rack receiver EM-XSW 2 rack receiver Connectors and controls Front 1 Display for status information • See „Information on the receiver’s display“ 2 UP/DOWN menu buttons for navigating the operating menu • See „Setting options on the front of the device“ 3 SET menu button for navigating the operating menu • See „Setting options on the front of the device“ 4 SYNC button for synchronizing the transmitter and receiver • See „Establishing a radio link | Synchronizing the receiver and transmitter“ 5 Co
EM-XSW 2 rack receiver Back 7 BNC sockets, antenna inputs • See „Connecting antennas“ 8 XLR-3 socket for Balanced audio output • See „Outputting audio signals“ 9 6.
EM-XSW 2 rack receiver Connecting/disconnecting the receiver to/ from the power supply system Only use the supplied power supply unit. It is designed for your receiver and ensures safe operation. To connect the receiver to the power supply system: ▷ Pass the cable of the power supply unit through the strain relief. ▷ Insert the plug of the power supply unit into the Power socket on the receiver. ▷ Slide the supplied country adapter onto the power supply unit.
EM-XSW 2 rack receiver Connecting antennas To connect the supplied rod antennas: Connect the antennas to the two antenna inputs on the receiver as shown in the figure. ▷ Slightly angle the antennas to the left and right as shown in the figure.
EM-XSW 2 rack receiver Outputting audio signals The EM-XSW 2 has a balanced XLR-3M output socket and an unbalanced 6.3 mm jack output socket. ▷ Always use only one of the two output sockets. To connect an XLR cable: ▷ Plug the XLR cable into the Balanced socket on the EMXSW 2. To connect a jack cable: ▷ Plug the jack cable into the Unbalanced socket on the EMXSW 2. ▷ Set the Line/Mic switch to the desired position.
EM-XSW 2 rack receiver Installing receivers in a rack CAUTION Rack mounting poses risks When installing the device in a closed 19" rack or multi-rack assembly, please consider that, during operation, the ambient temperature, the mechanical load and the electrical potentials will be different from those of devices which are not mounted into a rack. ▷ Make sure that the ambient temperature within the rack does not exceed the permissible temperature limit stated in the specifications. See „SPECIFICATIONS“.
EM-XSW 2 rack receiver Mounting a single receiver in a rack ▷ Connect the mounting brackets to the sides of the receiver as shown in the figure. ► Attach the front panel as shown in the figure. ▷ If desired, attach the antennas to the front panel as shown in the figure. This requires the optional GA 2-XSW 2 antenna front mount kit (see „Accessories“).
EM-XSW 2 rack receiver Mounting two receivers side by side in a rack Place both receivers upside down and side by side on an even surface. ▷ Tighten the jointing plate as shown in the figure. ▷ Attach the mounting brackets as shown in the figure.
EM-XSW 2 rack receiver Switching the receiver on and off To switch the receiver on: ▷ Short-press the ON/OFF button. The receiver switches on. To switch the receiver to standby mode: ▷ Hold down the ON/OFF button until the display switches off. To switch the receiver off completely: ▷ Disconnect the receiver from the power supply system by unplugging the power supply unit from the wall socket.
EM-XSW 2 rack receiver Information on the receiver’s display Status information such as frequency, reception quality, battery status and audio level is shown on the display.
EM-XSW 2 rack receiver Transmitter battery: • XSW-SKM -> „Inserting and removing the batteries“ • XSW-SK -> „Inserting and removing the batteries“ Transmitter audio level: • XSW-SKM -> „Setting the input sensitivity“ • XSW-SK -> „Setting the input sensitivity“ 65
EM-XSW 2 rack receiver Setting options on the front of the device Navigation buttons Use the following buttons to navigate through the receiver’s settings.
EM-XSW 2 rack receiver SCAN menu item Under the SCAN menu item, you can perform an automatic frequency scan of your area. This enables you to easily find and assign free radio frequencies. Switch off all transmitters before you perform the scan. If transmitters are still switched on, they are detected as unavailable frequencies and the frequencies that are actually available cannot then be used. Press the UP or DOWN button until the SCAN menu item appears in the display.
EM-XSW 2 rack receiver Press the UP or DOWN button to select a frequency bank. ▷ Press the SET button to start the frequency scan in the selected bank. The next free frequency is shown on the display. ▷ Press the SET button to accept the displayed frequency. or ▷ Press the UP or DOWN button to display the next free frequency. or ▷ Press the ON/OFF (ESC) button to cancel the scan. The previous frequency remains unchanged.
EM-XSW 2 rack receiver ▷ ▷ ▷ ▷ ▷ ▷ Press the UP or DOWN button to select a frequency bank. Press the SET button to save the selected frequency bank. Press the UP or DOWN button to select a channel in the frequency bank. Press the SET button to save the selected channel. or Press the ON/OFF (ESC) button to cancel the setting. The previous frequency remains unchanged.
EM-XSW 2 rack receiver TUNE menu item Under the TUNE menu item, you can manually set the radio frequency independently of the preset channels. If you are not sure whether the selected frequency is free, we recommend performing a scan to detect all free frequencies: „SCAN menu item“. Press the UP or DOWN button until the TUNE menu item appears in the display. ▷ Press the SET button to open the menu item. ▷ Press the UP or DOWN button to set the frequency.
EM-XSW 2 rack receiver Adjusting the volume of the audio outputs Use the VOLUME control knob to set the level of the audio signal coming from the receiver’s audio outputs (Balanced/Unbalanced). This audio signal can be output to a mixing console or an amplifier, for example. ▷ Turn the VOLUME control knob to adjust the volume. ► ▷ Make sure that the signal in the next device in the signal chain (e.g. mixing console, power amplifier, guitar amplifier, etc.) is not overdriven.
EM-XSW 2 rack receiver Setting options on the rear of the device Selecting the signal type (Mic/Line) ▷ Set the Line/Mic switch to the desired position. • Line: when using instruments or other line sources with the SK-XSW bodypack transmitter • Mic: when using the SKM-XSW handheld transmitter or a microphone with the SK-XSW bodypack transmitter Setting the squelch The squelch function can be used to suppress disturbing noise during transmission, such as hiss.
EM-XSW 2 rack receiver Configuring a multi-channel system Please note when creating multi-channel systems: Only the factory-preset transmission frequencies within one frequency bank are intermodulation-free. Set the same channel bank for all receivers. ▷ Assign one channel from this channel bank to each receiver. ▷ We recommend using the SCAN function, as this is the most reliable way to identify free frequencies (see „SCAN menu item“).
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Product overview ► 1 ON/OFF button with LED • See „Switching the handheld transmitter on and off“ • Green: the radio link is established • Flashing red/green: pairing active (see „Establishing a radio link | Synchronizing the receiver and transmitter“) • Flashing red: low battery (see „Inserting and removing the batteries“) 2 SYNC button • See „Establishing a radio link | Synchronizi
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Inserting and removing the batteries You need two AA 1.5 V batteries to operate the handheld transmitter. Unscrew the microphone housing as shown in the figure and pull it downward. ▷ Insert the batteries as indicated in the battery compartment. Observe correct polarity. ▷ Screw the microphone housing back on.
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Battery status Battery charge status in the display: ► Charge status is critical (LOW BATT): ► 76
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Switching the handheld transmitter on and off To switch the handheld transmitter on: ▷ Short-press the ON/OFF button. The transmitter switches on. The ON/OFF button lights up. ► To switch the handheld transmitter off: ▷ Hold down the ON/OFF button until the light in the ON/OFF button disappears. Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the devices must be synchronized.
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Information on the handheld transmitter’s display You can view the following information on the transmitter display. Frequency bank Frequency Bank 1 Ch. 1 925.
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Setting the input sensitivity Use the Sensitivity switch to adjust the level of the audio signal sent to the receiver. Unscrew the microphone housing and pull it downward. ▷ Adjust the input sensitivity using the Sensitivity switch. ▷ Pay attention to the level indicator on the receiver display.
Handheld transmitters SKM 825-XSW | SKM 835-XSW | SKM 865-XSW Muting the handheld transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position to mute or activate the audio signal.
SK-XSW bodypack transmitter SK-XSW bodypack transmitter Product overview ► 1 3.
SK-XSW bodypack transmitter 7 SYNC button • See „Establishing a radio link | Synchronizing the receiver and transmitter“ 8 Sensitivity switch • See „Setting the input sensitivity“ Inserting and removing the batteries You need two AA 1.5 V batteries to operate the handheld transmitter. Press the two catches and open the battery compartment cover. ▷ Insert the batteries as shown in the figure. Observe correct polarity. ▷ Close the battery compartment. The cover locks into place with an audible click.
SK-XSW bodypack transmitter Battery status Battery charge status in the display: ► Charge status is critical (LOW BATT): ► 83
SK-XSW bodypack transmitter Connecting a microphone to the bodypack transmitter To connect a microphone to the bodypack transmitter: Insert the cable’s 3.5 mm jack plug into the socket on the bodypack transmitter as shown in the diagram. ▷ Screw the plug’s coupling ring onto the audio socket thread of the bodypack transmitter. ▷ Connecting an instrument or line source to the bodypack transmitter You can connect instruments or audio sources with a line level to the bodypack transmitter.
SK-XSW bodypack transmitter Insert the cable’s 3.5 mm jack plug into the socket on the bodypack transmitter as shown in the diagram. ▷ Screw the plug’s coupling ring onto the audio socket thread of the bodypack transmitter.
SK-XSW bodypack transmitter Switching the bodypack transmitter on and off To switch the bodypack transmitter on: ▷ Short-press the ON/OFF button. The transmitter switches on. The LED lights up. ► To switch the bodypack transmitter off: ▷ Hold down the ON/OFF button until the LED switches off. Establishing a connection to the receiver To establish a radio link between the transmitter and the receiver, the devices must be synchronized.
SK-XSW bodypack transmitter Information on the bodypack transmitter’s display You can view the following information on the transmitter display. Frequency bank Frequency Bank 1 Ch. 1 925.
SK-XSW bodypack transmitter Setting the input sensitivity Use the Sensitivity switch to adjust the level of the audio signal sent to the receiver. Press the two catches and open the battery compartment cover. ▷ Adjust the input sensitivity using the Sensitivity switch. ▷ Pay attention to the level indicator on the receiver display.
SK-XSW bodypack transmitter Muting the bodypack transmitter You can mute the audio signal using the mute switch. ► ▷ Slide the mute switch to the desired position to mute or activate the audio signal.
Establishing a radio link | Synchronizing the receiver and transmitter Establishing a radio link | Synchronizing the receiver and transmitter Conditions and restrictions for using frequencies There may be special conditions and restrictions for using frequencies in your country. Before putting the product into operation, find the information for your country at the following address: www.sennheiser.
Establishing a radio link | Synchronizing the receiver and transmitter ► 91
Cleaning and maintenance Cleaning and maintenance Note the following information when cleaning and maintaining products of the Evolution Wireless Digital series. CAUTION Liquids can damage the products’ electronics. Liquids entering the product housing can cause a short-circuit and damage the electronics. ▷ Keep all liquids away from the products. ▷ Do not use any solvents or cleansing agents.
Cleaning and maintenance From time to time, you should also clean the microphone module contacts: ▷ Wipe the contacts of the microphone module with a soft, dry cloth. Cleaning the bodypack transmitter contacts Wipe the contacts with a dry cloth.
SPECIFICATIONS SPECIFICATIONS System Modulation Wideband FM Frequency ranges • • • • • • • • • A: 548 – 572 MHz GB: 606 – 630 MHz B: 614 – 638 MHz BC: 670 – 694 MHz C: 630 – 662 MHz D: 766 – 790 MHz JB: 806.125 – 809.750 MHz E: 821 – 832 MHz & 863 – 865 MHz K: 925 – 937.
System Signal-to-noise ratio ≥ 103 dBA Audio THD ≤ 0.9 % Operating temperature range 0 °C – +40 °C (14 °F – 131 °F) Storage temperature range -20 °C – +70 °C (14 °F – 131 °F) Relative humidity max.
EM-XSW 1 stationary receiver EM-XSW 1 stationary receiver Receiver principle double superheterodyne Diversity principle Antenna switching diversity via internal antennas Sensitivity (at peak deviation) < 3 µV at 52 dB(A)eff S/N AF frequency response 50 – 16,000 Hz (-3 dB) Max. AF output voltage (at peak deviation, 1 kHz AF) • 6.3 mm jack socket (unbalanced): +6 dBu • XLR socket (balanced): +12 dBu Audio adjustment range 45 dB, adjustable in 5 dB steps Power supply DC 12 V nom.
EM-XSW 1 stationary receiver Dimensions Approx. 200 x 42 x 127 mm Weight Approx.
EM-XSW 1 DUAL rack receiver EM-XSW 1 DUAL rack receiver Receiver principle double superheterodyne Diversity principle Antenna switching diversity via internal antennas Sensitivity (at peak deviation) < 3 µV at 52 dB(A)eff S/N AF frequency response 50 – 16,000 Hz (-3 dB) Max. AF output voltage (at peak deviation, 1kHz AF) • 6.3 mm jack socket (unbalanced): +6 dBu • XLR socket (balanced): +12 dBu Audio adjustment range 45 dB, adjustable in 5 dB steps Power supply DC 12 V nom.
EM-XSW 1 DUAL rack receiver Dimensions Approx. 320 x 42 x 127 mm Weight Approx.
EM-XSW 2 stationary receiver EM-XSW 2 stationary receiver Receiver principle double superheterodyne Diversity principle True diversity Sensitivity (at peak deviation) < 3 µV at 52 dB(A)eff S/N AF frequency response 50 – 16,000 Hz (-3 dB) Max. AF output voltage (at peak deviation, 1kHz AF) • 6.3 mm jack socket (unbalanced): +6 dBu • XLR socket (balanced): +12 dBu Audio adjustment range 40 dB, continuously adjustable with control knob Power supply DC 12 V nom.
EM-XSW 2 stationary receiver Dimensions Approx. 200 x 42 x 127 mm Weight Approx.
SKM-XSW handheld transmitter SKM-XSW handheld transmitter Transmission power 10 mW AF frequency response • SKM 825-XSW • 80 – 14,000 Hz • SKM 835-XSW • 80 – 16,000 Hz • SKM 865-XSW • 80 – 16,000 Hz Power supply 2 AA batteries, 1.5 V Operating time approx. 10 hours Microphone type • SKM 825-XSW • Dynamic • SKM 835-XSW • Dynamic • SKM 865-XSW • Capacitor, pre-polarized Input sensitivity (capsule) • SKM 825-XSW • 1.5 mV/Pa • SKM 835-XSW • 1.5 mV/Pa • SKM 865-XSW • 1.
SKM-XSW handheld transmitter Pick-up pattern • SKM 825-XSW • Cardioid • SKM 835-XSW • Cardioid • SKM 865-XSW • Super-cardioid Adjustment range of transmitter sensitivity 0 to -30 dB, adjustable in 10 dB steps Housing material rugged ABS housing Dimensions Approx. 260 x 50 mm Weight Approx.
SK-XSW bodypack transmitter SK-XSW bodypack transmitter Transmission power 10 mW AF frequency response • 50 – 16,000 Hz (Line) • 80 – 16,000 Hz (Mic) Audio input 3.5 mm jack socket Max. input voltage (Mic/Line) at 3% THD • Typically 1.5 V rms Mic @ -30 dB gain • Typically 2.6 V rms Line @ -30 dB gain Power supply 2 AA batteries, 1.5 V Operating time approx. 10 hours Adjustment range of transmitter sensitivity 0 to -30 dB, adjustable in 10 dB steps Housing material rugged ABS housing Dimensions Approx.
Microphones Microphones ME 2-2 Transducer principle Capacitor, pre-polarized Sensitivity 20 mV/Pa Pick-up pattern Omni-directional Max. sound pressure level (SPL) 130 dB ME 3-II Transducer principle Capacitor, pre-polarized Sensitivity 1.6 mV/Pa Pick-up pattern Cardioid Max.
Microphones e 908T Transducer principle Capacitor, pre-polarized Sensitivity 0.6 mV/Pa Pick-up pattern Cardioid Max.
NT 12-5 CW power supply unit NT 12-5 CW power supply unit Nominal input voltage AC 100 – 240 V Power frequency 50 or 60 Hz Input current ≤ 200 mA Nominal output voltage DC 12 V Output current ≤ 500 mA Standby power consumption ≤ 0.075 W @ AC 230 V ≤ 0.1 W @ AC 115 V Energy efficiency level DOE Level VI Weight (without adapter) Approx. 65 g Cable length approx. 1.
NT 12-5 CW power supply unit Storage temperature range -20 °C – +60 °C (14 °F – 131 °F) Relative humidity max.
CONTACT CONTACT ► Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Questions about the product / Help with technical issues If you have any technical questions or problems with the product, please contact Sennheiser customer service. www.sennheiser.com/service-support Feedback on the instruction manual Do you have any questions or suggestions about this instruction manual? Write to us at: techcomm@sennheiser.
