Instruction manual - XS Wireless 1 & XS Wireless 2

EM-XSW 1 rack receiver
35
Setting options on the front of the device
Navigation buttons
Use the following buttons to navigate through the receiver’s
settings.
►
Setting the frequency automatically (AUTO SCAN)
Performs an automatic frequency scan of your area. This en-
ables you to easily find and assign free radio frequencies.
▷ Switch off all transmitters before you perform the scan. If
transmitters are still switched on, they are detected as un-
available frequencies and the frequencies that are actually
available cannot then be used.
▷
▷
Press the SET/SCAN button for approx. 3 seconds.
►