XS Wireless instruction manual
Table Of Contents
Putting the XS WIRELESS systems into operation
8 | XS WIRELESS
Putting the bodypack transmitter into operation
Inserting/replacing the batteries (see fig. “SK 20”)
왘 Use two AA size batteries (1.5 V) for powering the SK 20 bodypack transmitter.
왘 Open the battery compartment cover
9.
왘 Insert the batteries. Observe correct polarity when inserting the batteries.
Connecting the microphone/instrument cable
The bodypack transmitter’s audio input is designed for the connection of both condenser
microphones (ME 2-2 clip-on microphone and ME 3 headmic) and instruments (e.g.
guitars).
왘 Connect the clip-on microphone, headmic or instrument to the microphone/instrument
input
1.
Attaching the clip-on microphone
왘 Use the microphone clip to attach the ME 2-2 clip-on microphone to clothing.
왘 Conduct the cable so that noise due to friction is avoided and that the microphone cable
and the antenna do not cross.
Putting on the headmic
왘 Adjust the ME 3 headmic so that a comfortable and secure fit is ensured.
왘 Position the microphone so that its sound inlet is directed towards the sound source.
Attaching the bodypack transmitter to clothing
왘 Use the belt clip
0 to attach the bodypack transmitter to clothing. Make sure that the
antenna is at least 1 cm away from the body and is not kinked.
Putting the radio microphone into operation
Inserting/replacing the batteries (see fig. “SKM 35/SKM 65”)
왘 Use two AA size batteries (1.5 V) for powering the SKM 35/SKM 65 radio microphone.
왘 Unscrew the lower part of the microphone body and open the battery compartment
cover.
왘 Insert the batteries. Observe correct polarity when inserting the batteries.
SK 20 SKM 35/SKM 65
1.5V AA 1.5V AA
A