Operation Manual

Using the XS WIRELESS systems
10 | XS WIRELESS
Muting the transmitters
To mute the transmitters:
왘 Press the MUTE button. The mute LED lights up yellow. The audio signal is muted.
To cancel the muting of the transmitters:
왘 Press the MUTE button. The mute LED goes off. The muting is canceled.
Adjusting the sensitivity
왘 Use the slide switch 6 (SK) or 5 (SKM) to adjust the sensitivity.
Selecting and changing a receiver channel
Make sure that all receivers are set to the same frequency bank in order to prevent inter-
ference and intermodulation to the transmitter.
Selecting a menu item and activating it
왘 Press the UP button
3 or DOWN button 4 to select the TUNE, PRESET or SCAN
menu item.
왘 Press the set button 6 to activate the selected menu item.
You can vary the volume and the bass reproduction by increasing/decreasing the
distance between radio microphone and mouth.
Menu item Select this menu item to ...
TUNE manually set an unused frequency.
PRESET select a preset channel.
SCAN set an unused channel by automatic searching.
615.
375
615.
375