Instruction manual - XS Wireless Digital

Operation
18
Operation
Connecting the microphone to the transmitter
Plug your microphone’s jack plug into the jack socket on the transmit-
ter.
Insert the transmitter into the belt clip.
Fasten the belt clip to your clothes, for example on your belt or waist-
band.
Connecting the receiver to a mixing console
Plug the receiver into the XLR input of a channel on your mixing con-
sole.
Switching on the transmitter and receiver
Briefly press the button on the transmitter and the button on the receiv-
er.
The status LEDs indicate the charge level for four seconds.
During these four seconds, check that the transmitter and receiver are
sufficiently charged.
> 75%
5% – 75%
< 5%
If the status LED remains red, you should charge the rechargeable bat-
tery first. If the status LED flashes red, the charge level is too low. You
have to charge the rechargeable battery first (see „Charging the re-
chargeable battery“).
After four seconds, the status LED starts flashing green. The flashing
indicates that a wireless connection is being established.
The status LEDs remain green once the transmitter and receiver are
connected. If the status LEDs do not remain green, either the charge
level is below 15% (see Checking the charge level during use“) or the
transmitter and receiver are not paired (see „Pairing“).