Instruction manual - XS Wireless Digital

Operation

Holding the microphone

►

▷ Grip the microphone only by the handle.

▷ Hold the microphone 5 to 10 cm in front of your mouth.

▷ Do not grab the transmitter. The range may decrease if the transmitter

is covered.

▷ Do not touch the microphone basket. The sound may be distorted if the

microphone basket is covered.

Switching on the transmitter and receiver

►

▷ Briefly press the button on the transmitter and the button on the receiv-

er.

The status LEDs indicate the charge level for four seconds.

▷ During these four seconds, check that the transmitter and receiver are

sufficiently charged.

> 75%

5% – 75%

< 5%

If the status LED remains red, you should charge the rechargeable bat-

tery first. If the status LED flashes red, the charge level is too low. You

have to charge the rechargeable battery first (see „Charging the re-

chargeable battery“).

After four seconds, the status LED starts flashing green. The flashing

indicates that a wireless connection is being established.