Instruction manual - XS Wireless Digital

Operation
26
The status LEDs remain green once the transmitter and receiver are
connected. If the status LEDs do not remain green, either the charge
level is below 15% (see „Checking the charge level during use“) or the
transmitter and receiver are not paired (see „Pairing“).
Switching off the transmitter and receiver
►
▷ Press the button on the transmitter and the button on the receiver until
the status LEDs switch off.
Muting the audio signal
When using a set, you can mute the audio signal. The audio signal can then
be unmuted.
►
▷ To mute the audio signal: Briefly press the button on the transmitter or
receiver.
►
▷ To unmute the audio signal: Briefly press the button on the transmitter
or receiver.