Instruction manual - XS Wireless Digital

Operation
39
Attaching the receiver to the Pedalboard
If necessary, you can attach the receiver to your Pedalboard.
▷ Use the provided fastening options on the Pedalboard, for example the
adhesive hook-and-loop fastener strips.
▷ Alternatively, you can attach the receiver with screws using the thread-
ed holes on the bottom of the receiver (M5 × 10). A drill template is in-
cluded.
If using multiple effects devices on your Pedalboard, the receiver
must always be the first device in the series, since it is a wireless re-
ceiver and therefore does not have an input socket for connecting it
with a cable.
Connecting the receiver to an amplifier
You can connect the receiver to an amplifier using a cable with jack plugs
(6.3 mm) or connect it to the next device on the Pedalboard.
▷ Connect the receiver’s output to the input socket on your amplifier or
on the next device on the Pedalboard.
If using multiple effects devices on your Pedalboard, the receiver
must always be the first device in the series, since it is a wireless re-
ceiver and therefore does not have an input socket for connecting it
with a cable.
Connecting the receiver to a mixing console
You can connect the receiver to a mixing console using an XLR cable.
▷ Connect the receiver’s XLR output to the XLR input of a channel on your
mixing console.