User manual
5
II. PRESENTATION
Sens’it is a connected device whose objective is to
demonstrate capabilities of Sigfox network. It includes
several sensors that will measure data and send it to web and
mobile applications available on www.sensit.io
THE SENS’IT CAN BE CONFIGURED IN 6 DIFFERENT
MODES:
* Temperature and Humidity mode (LED blinks in green).
In this mode, the Sens’it will send sensors’ data at a dened
frequency (every 10min, hour, 6hours, day).
* Light mode (LED blinks in yellow). In this mode, the Sens’it
will either send light sensor data at a dened frequency or
will only send notication based on trigger.
* Door opening detection (LED blinks in light blue). In this
mode, the Sens’it will be xed on a door, and will send an
alert every time the door is being opened.
* Vibration detection (LED blinks in dark blue). In this mode,
the Sens’it will send a notication every time the movement
sensor has detected a movement.
* Magnet (LED blinks in Purple). The Sens’it will send a
message every time the magnet is put near the right side of
the Sens’it.
* Button – Only (Secondary LED blinks in White). Sens’it will
send a message every time the button has been pressed.