Sens’it 3 Six sensors, one button, so many possibilities Multi-sensor Rechargeable Water resistant Reprogrammable Version : March 2018
Sens’it 3 is an electronic object with several sensors and the ability to communicate on the Sigfox network. This makes it suitable for IoT uses. The included sensors and actuators are: thermometer, hygrometer, light meter, accelerometer, magnetometer, reed switch, and button. The Sens’it can be configured to communicate on the Sigfox RC1, RC2, RC3, or RC4. It is fully reconfigurable and therefore can be used for specific behaviors. A dedicated Software Development Kit (SDK) is available on www.sensit.io.
Sens’it model 3.1 3.2 3.3 3.4 RADIO TRANSMISSION CHARACTERISTICS Sigfox Ready class 0U 0U 0U 0U Range of supported operating frequencies (*) 868 to 869.7 MHz 902 to 908 MHz 923.2 MHz (TX) 922.2 MHz (RX) 920 to 925 MHz Transmit Power emission 14 dBm ERP 22 dBm ERP 10 dBm ERP 22 dBm ERP INTERFACES LEDs 3 (White, Red, RGB) Port Micro-USB Control Central button MECHANICAL AND ENVIRONMENTAL Product dimensions 52 x 82 x 15 mm (2 x 3.2 x 0.6 in) Product weight 50 g (1.
About Sigfox Sigfox is the world’s leading provider of connectivity for the Internet of Things (IoT). The company has built a global network to connect billions of devices to the Internet while consuming as little energy as possible, as simply as possible. +33 (0)5 82 08 07 10 Bâtiment E-volution 425, rue Jean Rostand 31670 Labège – France sigfox.com The information presented is subject to change without notice. Sigfox assumes no responsibility for inaccuracies contained herein. www.sigfox.
