Data Sheet
Sens’it 3 is an electronic object with several sensors and the ability to
communicate on the Sigfox network. This makes it suitable for IoT uses.
The included sensors and actuators are: thermometer, hygrometer, light meter,
accelerometer, magnetometer, reed switch, and button. The Sens’it can be
congured to communicate on the Sigfox RC1, RC2, RC3, or RC4.
It is fully recongurable and therefore can be used for specic behaviors.
A dedicated Software Development Kit (SDK) is available on www.sensit.io.
Thanks to this SDK, developers can create their own rmware. They can rewrite
the Sens’it behavior and include the device in a custom end-to-end solution,
combining it with an in-house online platform for tailored data analysis.
Sens’it Discovery is the end-to-end solution conceived by Sigfox using Sens’it 3.
It combines the Sens’it 3 device with the sensit.io platform, along with Sigfox
connectivity. When used as part of the Sens’it Discovery solution, the Sens’it 3
device gives access to 5 distinct active modes:
1. Temperature and humidity monitoring
2. Light monitoring
3. Door opening detection
4. Vibration detection
5. Magnet detection
Standby mode
Find more information on
Sens’it and Sens’it Discovery
including the devkit activation
procedure on www.sensit.io