User manual

SENS’IT DISCOVERY ACTIVATION AND ACCOUNT CREATION

You need to create an account to activate your Sens’it and start

seeing data measured by the device.

You can either download the Sens’it App for iOS and Android, or

visit www.sensit.io. Then, select “Start with my Sens’it”, and

follow the instructions.

NOTE: you must be in a Sigfox-covered area.

USER INSTRUCTIONS

The Sens’it is easy to conﬁgure:

Select the mode you want to use (see the “LED color for

each available mode” section in this manual).

Place the Sens’it where you want to take measurements

…or press the button twice to send a message.

Keep track of your data on the online dashboard

…or receive notiﬁcations according to conﬁgured events.

The Sens’it behaves diﬀerently depending on how it is

pressed:

Indicate the current mode: 1 short press. The main

LED blinks current mode color.

Change mode: 1 long press. The LED changes color

depending on the currently active mode. Keep the

button pressed to cycle through modes. Once a mode

is chosen, the Sens’it sends a message.

Send a message: 2 short presses. The secondary LED

blinks white while the device is sending the message. You

can then use the app (web or mobile) to turn that message

into a notiﬁcation.

