User manual
LED COLOR FOR EACH AVAILABLE MODE
The Sens’it has 5 different modes. Only one mode can be
selected at a time. Each mode has a specific color and a default
behavior:
Green: Temperature and Humidity monitoring. The Sens’it
takes measurements and sends data every hour.
Yellow: Light monitoring. The Sens’it takes measurements
and sends data every hour.
Light blue: Door opening detection. Once the Sens’it is
affixed to a door, it sends data every time the door is being
opened or closed (calibration required, see next page).
Dark blue: Vibration detection. The Sens’it sends data
every time the accelerometer detects a motion.
Pink: Magnet detection. The Sens’it sends data every time a
magnet is detected near, or removed from its right side.
NB: Standby mode disables all sensors (main LED is off and
secondary LED is white).
CUSTOMIZE YOUR USAGE ON THE APP
Set when you want to receive notifications for each
mode (periodicaly or based on readings).
For periodic notifications, define the frequency: every 10
minutes, every hour, every 6 hours, every 24 hours.
Change door opening and vibration detection sensitivity.
Change notification threshold for temperature, humidity
and light.