User manual

About the door calibration:

Stick the Sens'it onto your door.

Set the mode to door opening detection (light blue).

Make 3 short presses on the button.

The main LED blinks light blue rapidly.

Door calibration is done!

LED USER GUIDE

Any LED blinks rapidly: A message is being sent.

Main LED blinks active mode's color every second:

Device is waiting for a message from the platform.

Main and secondary LEDs blink 3 times alternatively:

Low battery.

Main LED blinks red once: Message limit reached,

retry later.

Main LED blinks red more than once: Hardware error,

please contact support.

SENS’IT FOR DEVELOPERS

Sens’it Discovery introduces everyone to the possibilities of

Sigfox through a conﬁgurable end-to-end solution.

With the Sens’it SDK, developers can use their Sens’it as a

devkit, build their own ﬁrmware, have access to the Sigfox

Cloud… and all that with Sigfox connectivity included!

Learn more about the Sens’it SDK on www.sensit.io!

PLEASE NOTE: Only the last version of this document available on the Sigfox technical system

documentation is oﬃcial and applicable. The information presented is subject to change

without notice. Sigfox assumes no responsibility for inaccuracies contained herein. Sigfox and

the sigfox logo are trademarks of Sigfox. All other trademarks are the property of their

respective owners.

Sigfox, 425 rue Jean Rostand 31670 Labège, France