Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Single Phase GNA5, SPST-NO, 25A, 280V, Screw Terminal

GNA5 Series

• Current rating 10 and 25 Amps

• Output voltage 24-280 VAC

• Triac Output (Resistive Loads Only)

• Available with or without IP20 touch-safe cover

• LED Input Status Indicator

• UL Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Screw or Quick Connect

• Redesigned housing with anti-rotation barriers

• EMC Compliant to level 3

OUTPUT SPECIFICATIONS

(1)

Description

Operating Voltage (47-63Hz) [Vrms] 24-280

10 A

Transient Voltage [Vdc] (2) 600

Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500

24-280

600

0.1

500

Maximum Load Current [Arms]

(3) 10

Minimum Load Current [mArms] 100

1 Second surge current (Apk. Ta=25

°C) 50/60 Hz 30

Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 90/100

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.5

Thermal Resistance Junction to Case (Rjc) [°C/W] 2.2

Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 41/42

Minimum Heat Sink for Rated Current @ 40°C [°C/W] 3

25 A

100

239/250

1.3

0.8

285/259

1.5

Do not forget to visit us at: www.crydom.com

Datasheet

Panel Mount

For Generation 3 datasheet click here

AVAILABLE OPTIONS

Required for valid part number

For options only and not required for valid part number

Touch Safe Cover

4: Not included (IP00)

7: Included (IP20)

Operating Voltage

9: 24-280 VAC/

Zero Voltage Turn-On

Series

8413 9 14

Rated Load Current

0: 10 Amps

1: 25 Amps

Control Voltage

0: 3-32 VDC

1: 90-280 VAC

4: 3-32 VDC 3/16” QC input

5: 90-280 VAC 3/16” QC input

7: 3-32 VDC 1/4” QC input

9: 90-280 VAC 1/4” QC input

Thermal Pad

Blank: Not included

H: Included

1/4” QC output

terminals

(IP00 only)

PRODUCT SELECTION

Control Voltage 10 A 25 A

3-32 VDC 84134900 84134910

90-280 VAC 84134901 84134911

Summary of content (8 pages)

PAGE 1
Panel Mount Datasheet GNA5 Series • Current rating 10 and 25 Amps • Output voltage 24-280 VAC • Triac Output (Resistive Loads Only) • Available with or without IP20 touch-safe cover • LED Input Status Indicator • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Screw or Quick Connect • Redesigned housing with anti-rotation barriers • EMC Compliant to level 3 For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3-32 VDC 90-280 VAC 10 A 25 A 84134900 84134901
PAGE 2
Panel Mount Datasheet INPUT SPECIFICATIONS (1) Description Control Voltage Range Maximum Reverse Voltage Minimum Turn-On Voltage Must Turn-Off Voltage Minimum Input Current (for on-state) Maximum Input Current [mA] Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] DC Control AC Control 3-32 VDC (4) -32 VDC 3 VDC 1 VDC 9.5 mA 14mA 90-280 VAC (5) 90 VAC 10 VAC 5 mA 8.
PAGE 3
Panel Mount Datasheet WIRING DIAGRAM AC V Recommended Wire Sizes Load (9) 1 ( ) Input 1 Output S O L I D S TAT E R E L AY 4 3 INPUT 4 (– / ) Wire Pull-Out Strength (lb)[N] 24 AWG (0.2 mm2) / 0.2 [minimum] 10 [44.5] 2 x 12 AWG (3.3 mm2) / 3.3 [maximum] 90 [400] 20 AWG (0.5 2 OUTPUT Wire Size (Solid / Stranded) Terminals 2 ( ) mm2) / 0.518 [minimum] 30 [133] 2 x 10 AWG (5.3 mm2) / 5.3 110 [490] 2 x 8 AWG (8.4 mm2) / 8.
PAGE 4
Panel Mount Datasheet MECHANICAL SPECIFICATIONS (1) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination, IP00 1.1 [27.9] 0.49 [12.4] 1.88 [47.6] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. 1.7 [43.2] 1.10 [27.9] 0.49 [12.4] 2.25 [57.3] 1.88 [47.6] 1.7 [43.2] 1.75 [44.5] Quick Connect, Input 3/16”, Output 1/4” Mounting Hole/Slot 0.19 [4.9] DIA. Faston Terminal 0.25 x 0.032 (2 Places) 2.22 [56.3] 1.88 [47.6] 1.0 [25.4] 1.75 [44.
PAGE 5
Panel Mount Datasheet THERMAL DERATE INFORMATION (i) SSR metal base plate acting as heat sink, it must be exposed to free ambient air. 25 A 10 A 2°C/W 3°C/W 5°C/W 1.
PAGE 6
Panel Mount Datasheet ACCESSORIES Recommended Accessories Cover Hardware Kit KS101 HK1 HK4 Heat Sink Part No. Thermal Resistance Lug Terminal Thermal Pad [ºC/W] HS501DR 5.0 TRM1 HSP-1 HS301 / HS301DR 3.0 TRM6 HSP-2 HS251 2.5 HS201 / HS201DR 2.0 HS202 / HS202DR 2.0 HS172 1.7 HS151 / HS151DR 1.5 HS122 / HS122DR 1.2 HS103 / HS103DR 1.0 HS101 1.0 HS073 0.7 HS072 0.7 HS053 0.5 HS033 0.36 HS023 0.25 Rev. 091916 Do not forget to visit us at: www.crydom.
PAGE 7
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 8
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.