Datasheet

CKM Series
• Ratings from 10A to 30A @ 60 VDC
• Slim 22.5mm (width) package
• Low Leakage MOSFET Output
• LED input status indicator
• DC control
• DIN Rail and Panel Mount
PRODUCT SELECTION
Description 10 A 20 A 30 A
4-32 VDC Control CKM0610 CKM0620 CKM0630
OUTPUT SPECIFICATIONS (1)
Description CKM0610 CKM0620 CKM0630
Operating Voltage [VDC] 0-60 0-60 0-60
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1
Maximum Load Current [ADC] 10 20 30
Maximum Surge Current (10msec) [ADC] 30 60 90
Maximum On-State Voltage Drop @ Rated Current [VDC] 0.2 0.4 0.5
Maximum On-state Resistance @ Rated current (RDS-ON) [ohms] 0.02 0.018 0.016
INPUT SPECIFICATIONS (1)
Description Parameters
Control Voltage Range 4.0-32 VDC
Minimum Turn-On Voltage 4.0 VDC
Minimum Turn-Off Voltage 1.0 VDC
Maximum Input Current (2) 9 mA @ 5 VDC, 11 mA @ 32 VDC
Maximum Turn-On Time [msec] 1.0
Maximum Turn-Off Time [msec] 1.0
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz) 2500Vrms
Minimum Insulation Resistance (@ 500 V DC)
10
9
Ohms
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -40ºC to 80ºC
Ambient Storage Temperature Range -40ºC to 125ºC
Status Indicator Display Green LED
Weight (typical) 10 oz. (280g)
Encapsulation Thermally Conductive Epoxy
Terminals Box Clamp Type
Maximum Wire Size: AWG # 10 (3mm)
Recommended Terminal Screw Torque Range: 5.0-6.0 in lb (0.6-0.7 Nm)
Min. Side by Side Spacing 0.8 inch (20mm)
GENERAL NOTES
1) All parameters at 25°C unless otherwise specified.
2) Input circuitry for incorporates active current limiter.
NOTE: Inductive loads should be diode suppressed.