Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay CSW, SPST-NO, 10A, 280V, Screw Terminal

CSW Series

• Ratings from 10A to 90A @ 24-280 V AC

• 3-32 V DC input range

• Low off-state leakage current (snubberless)

• SCR output for heavy industrial loads

• EMC Compliant for reliable operation in harsh environments

• Replaces the CSD/CSE series relays

For Generation 3 datasheet click here

• Direct bond copper substrate

• Direct power lead frame

• Epoxy free design

PRODUCT SELECTION

Control Voltage 10A 25A 50A 75A 90A

3-32 VDC CSW2410 CSW2425 CSW2450 CSW2475 CSW2490

AVAILABLE OPTIONS

Required for valid part number

For options only and not required for valid part number

Series

Rated Load Current

10: 10 Amp

25: 25 Amp

50: 50 Amp

75: 75 Amp

90: 90 Amp

Termination

Blank: Screw

F: Quick Connect

(Up to 50 Amps

only)

K: Hex standoffs for

PC Board mounting(2)

Input Status LED

Blank: Not Included

G: Included

Thermal Pad

Blank: Not Included

H: Included

Operating Voltage

24: 24-280 VAC

Snubber

Blank: Not Included

S: Included

Overvoltage Protection

Blank: Not Included

P: Included

CSW 24 10 K P G S

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

H -10

(1)

(3) (4)

Not all part number combinations are available.

Contact Crydom Technical support for information on

the availability of a specific part number.

OUTPUT SPECIFICATIONS

(5)

90A75A50A25A10ADescription

Operating Voltage (47-440Hz) [Vrms] (6) 24-280 24-280 24-280 24-280 24-280

Transient Overvoltage [Vpk] 600 600 600 600 600

Maximum Off-State Leakage Current @ Rated Voltage [mArms] (7) 1.0 1.0 1.0 1.0 1.0

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500

Maximum Load Current [Arms] (2)(8) 10 25 50 75 90

Minimum Load Current [mArms] 150 150 150 150 150

Maximum 1 Cycle Surge Current (50/60) [Apk] 115/120 239/250 597/625 954/1000 1145/1200

Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15

Thermal Resistance Junction to Case (Rjc) [°C/W] 1.03 0.8 0.45 0.3 0.27

Maximum I² t for Fusing 50/60Hz (1/2 cycle) [A² sec] 66/60 285/259 1770/1621 4555/4150 6560/5976

Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5 0.5 0.5

INPUT SPECIFICATIONS

(5)

Description Parameters

Control Voltage Range (9) 3-32 VDC

Minimum Turn-On Voltage 3 VDC

Must Turn-Off Voltage 1.0 VDC

Typical Input Current

10 mA @ 12 VDC

Nominal Input Impedance

Active Current Limiter

Maximum Turn-On Time [msec] (10)

1/2 Cycle

Maximum Turn-Off Time [msec]

1/2 Cycle

Maximum Reverse Voltage -32 VDC

Do not forget to visit us at: www.crydom.com

Datasheet

Panel Mount

Summary of content (7 pages)

PAGE 1
Panel Mount Datasheet CSW Series • Ratings from 10A to 90A @ 24-280 V AC • Direct bond copper substrate • 3-32 V DC input range • Direct power lead frame • Low off-state leakage current (snubberless) • Epoxy free design • SCR output for heavy industrial loads • EMC Compliant for reliable operation in harsh environments • Replaces the CSD/CSE series relays For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 10A 3-32 VDC 25A CSW2410 AVAILABLE OPTIONS Operating Voltage 24: 24-280 VAC
PAGE 2
Panel Mount Datasheet GENERAL SPECIFICATIONS (5) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 V DC) 4000 Vrms 109 Ohm 10 pF -40 to 80 °C -40 to 125 °C 2.6 oz (74.9 g) UL94 V-0 Aluminum 13-15/1.5-1.7 18-20/2.0-2.2 18-20/2.0-2.2 w/”K” option 8-10 / 0.9-1.
PAGE 3
Panel Mount Datasheet MECHANICAL SPECIFICATIONS (5) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. 1 2 2.25 [57.3] 1.7 [43.2] S O L I D S TAT E R E L AY 4 Hex Standoff Termination (“K” Option) (2) 1.88 [47.6] OUTPUT INPUT 1.58 [40.2] 0.49 [12.4] 1 1.88 [47.6] OUTPUT Faston Terminal(16) 0.25 x 0.032 INPUT 1.40 [35.6] 1.
PAGE 4
Panel Mount Datasheet SURGE CURRENT INFORMATION 25 A 250 100 200 Surge Current (Amp) Surge Current (Amp) 10 A 120 80 60 40 20 0 0.01 0.1 1 Surge Duration (Secs) 150 100 50 10 0 0.01 10 900 800 700 600 500 400 300 200 100 0 0.01 0.1 1 Surge Duration (Secs) 50 A 75 A 500 Surge Current (Amp) Surge Current (Amp) 600 400 300 200 100 0 0.01 10 0.1 1 Surge Duration (Secs) 0.1 1 Surge Duration (Secs) 10 90 A Surge Current (Amp) 1200 1050 900 750 600 450 300 150 0 0.
PAGE 5
Panel Mount Datasheet AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 3 IEC 61000-4-5 : Electrical Surges – Level 3 IEC 600068-2-6: Vibration 0.33mm and 0.
PAGE 6
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.