Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Single Phase CX, SPST-NO, 5A, 660V, THT

CX Series

• SIP SSR

• Ratings of 5A @ 660 VAC

• SCR output for heavy industrial loads

• AC or DC control

• Zero-crossing (resistive loads) or random-fire (inductive loads) output

•

CE Compliant to EN60950-1

PRODUCT SELECTION

Control Voltage 5 A 5 A 5 A

3-15 VDC CX240D5

4-15 VDC CX380D5 CX480D5

15-32 VDC CXE240D5 CXE380D5 CXE480D5

18-36 VAC CXE240A5

90-140 VAC CX240A5

AVAILABLE OPTIONS

OUTPUT SPECIFICATIONS (1)

Description CX240x5 CX380x5 CX480x5

Operating Voltage (47-63Hz) [Vrms] 12-280 48-530 48-660

Transient Overvoltage [Vpk] 600 1200 1200

Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.1 0.1 0.1

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500

Maximum Load Current [Arms] 5 5 5

Minimum Load Current [Arms] 0.06 0.06 0.06

Maximum Surge Current (16.6ms) [Apk] 250 250 250

Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.4 1.4 1.4

Maximum I²t for fusing (8.3 msec) [A² sec] 260 260 260

Minimum Power Factor (with Maximum Load) 0.5 0.5 0.5

HP rating UL 508/IEC60947[HP/KW]: 240VAC 0.25/0.18 0.25/0.18 0.25/0.18

HP rating UL 508/IEC60947[HP/KW]: 380VAC NA 0.33/0.25 0.33/0.25

HP rating UL 508/IEC60947[HP/KW]: 480VAC NA NA 0.5/0.37

Summary of content (5 pages)

PAGE 1
CX Series • SIP SSR • Ratings of 5A @ 660 VAC • SCR output for heavy industrial loads • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output • CE Compliant to EN60950-1 PRODUCT SELECTION Control Voltage 3-15 VDC 4-15 VDC 15-32 VDC 18-36 VAC 90-140 VAC 5A 5A 5A CX380D5 CXE380D5 CX480D5 CXE480D5 CX240D5 CXE240D5 CXE240A5 CX240A5 AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] Maximum Off-State
PAGE 2
INPUT SPECIFICATIONS (1) Description CX240Dx Nominal Voltage Control Voltage Range Minimum Turn-On Voltage Drop Out Voltage Typical Input Current Nominal Input Impedance Maximum Turn-On Time [msec] (3) Maximum Turn-Off Time [msec] 5 VDC 3-15 VDC 3.0 VDC 1.0 VDC 15 mAdc 300 Ohm 1/2 Cycle 1/2 Cycle CX380/480Dx 5 VDC 4-15 VDC 4.0 VDC 1.0 VDC 15 mAdc 240 Ohm 1/2 Cycle 1/2 Cycle CXExxxDx 24 VDC 15-32 VDC 15.0 VDC 1.0 VDC 15 mAdc 1500 Ohm 1/2 Cycle 1/2 Cycle CX240A5 120 VAC 90-140 VAC 90.0 Vrms 10.
PAGE 3
MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 CE EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: E116949 LR81689 70938 (DC Control Only) Rev.
PAGE 4
DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 5
ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.