Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay D06D, SPST-NO, 100A, 48V, Screw Terminal

D06D Series

• Ratings from 60A to 100A @ 60 VDC

• Mosfet output

• UL Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

• DC control

• EMC Compliant to Level 3

• Epoxy Free Design

PRODUCT SELECTION

Control Voltage 60A 80A 100A

3.5-32 VDC D06D60 D06D80 D06D100

Not all part number combinations are available.

Contact Crydom Technical Support for information on

the availability of a specific part number.

Required for valid part number

For options only and not required for valid part number

AVAILABLE OPTIONS

Operating Voltage

06D: 1-60 VDC

Rated Load Current

60: 60 Amps

80: 80 Amps

100: 100 Amps

Series

06D 60

Termination

Blank: Screws & clamps

K: Installed standoffs with (1)

screws for PC Board mounting

Thermal Pad

Blank: Not Included

H: Included

K H

OUTPUT SPECIFICATIONS

(2)

Description 100A80A60A

Recommended Operating Voltage [Vdc] 1-48 1-48 1-48

Absolute Maximum Rating [Vdc]

60 60 60

Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.1 0.1 0.3

Maximum Load Current [Adc]

(1)(3) 60 80 100

Minimum Load Current [mA]

(4) 5 5 5

Maximum Surge Current (10 msec)[Adc] 180 220 270

Maximum On-State Voltage Drop @ Rated Current [Vdc] 0.6 0.7 0.5

Maximum On-State Resistance [RDS-ON][Ohms] 0.01 0.008 0.005

Thermal Resistance Junction to Case (Rjc) [°C/W] 0.73 0.73 0.51

Minimum Heat Sink for Rated Current @40°C [°C/W] 1 0.5 0.5

Maximum Pulse Width Modulation Frequency [Hz]

(5) 1000 900 700

INPUT SPECIFICATIONS

(2)

Description DC Control

Control Voltage Range 3.5-32 VDC

Maximum Reverse Voltage -32 VDC

Minimum Turn-On Voltage (6) 3.5 VDC

Must Turn-Off Voltage 1 VDC

Minimum Input Current (for on-state) 10 mA

Maximum Input Current 15 mA

Nominal Input Impedance Current Regulated

Maximum Turn-On Time [µsec] 100

Maximum Turn-Off Time [µsec] 150

Do not forget to visit us at: www.crydom.com

Datasheet

Panel Mount

Summary of content (7 pages)

PAGE 1
Panel Mount Datasheet D06D Series • Ratings from 60A to 100A @ 60 VDC • Mosfet output • UL Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers • DC control • EMC Compliant to Level 3 • Epoxy Free Design For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3.
PAGE 2
Panel Mount Datasheet GENERAL SPECIFICATIONS (2) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) Maximum Capacitance, Input/Output Ambient Operating Temperature Range (7) Ambient Storage Temperature Range Weight (typical) Housing Material Baseplate Material Input Terminal Screw Torque Range (in-lb/Nm) Load Terminal Screw Torque Range (in-lb/Nm) SSR Mounting Screw Torque Range (in-lb/Nm) Input/Load Terminal Screw Torque Range (in-lb/Nm) (1)
PAGE 3
Panel Mount Datasheet MECHANICAL SPECIFICATIONS (2) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. +2 1 1.7 [43.2] S O L I D S TAT E R E L AY 4 Hex Standoff Termination (“K” Option) (1) 2.25 [57.3] 1.88 [47.6] +3 OUTPUT Mounting Hole/Slot 0.19 [4.9] DIA. +2 INPUT 1.0 [25.4] 1.0 [25.4] 1.75 [44.5] 1.75 [44.5] 2.25 [57.
PAGE 4
Panel Mount Datasheet SURGE CURRENT INFORMATION Single Pulse (i) Duty Factor (10%) (ii) Duty Factor (50%) (ii) Duty Factor (20%) (ii) DC06D80 350 250 300 Surge Current (Amp) Surge Current (Amp) DC06D60 300 200 150 100 50 0 0.1 1 10 100 250 200 150 100 50 0 1000 0.1 1 10 100 Surge Duration (msec) Surge Duration (msec) 1000 Surge Current (Amp) DC06D100 500 450 400 350 300 250 200 150 100 50 0 0.
PAGE 5
Panel Mount Datasheet AGENCY APPROVALS EN60950-1: Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: IEC 61000-4-2 Electrostatic Discharge Level 3 IEC 61000-4-4 Electrically Fast Transients Level 3 IEC 61000-4-5 Electrical Surges Level 3 E116950 ACCESORIES Recommended Accessories New Accessories! Protective Cover & Hardware Kits Protective Cover Part number: KS101 Clear plastic cover compatible with all new S1 designs.
PAGE 6
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.