Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Single Phase Series 1, SPST-NO, 25A, 280V, Screw Terminal

OUTPUT SPECIFICATIONS

(5)

125A110A90A75A50A25A10ADescription

Operating Voltage (47-440Hz) [Vrms] (6) 24-280 24-280 24-280 24-280 24-280 24-280 24-280

Transient Overvoltage [Vpk] 600 600 600 600 600 600 600

Maximum Off-State Leakage Current @ Rated Voltage [mArms] (7) 1 1 1 1 1 1 1

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500 500 500

Maximum Load Current [Arms] (2)(8) 10 25 50 75 90 110 125

Minimum Load Current [mArms] 150 150 150 150 150 250 250

Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 115/120 239/250 597/625 954/1000 1145/1200 1432/1500 1670/1750

Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15 1.15 1.15

Thermal Resistance Junction to Case (Rjc) [°C/W] 1.03 0.8 0.45 0.3 0.27 0.25 0.22

Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 66/60 285/259 1770/1621 4555/4150 6560/5976 10249/9338 13950/12709

Minimum Power Factor (at Maximum load) (3) 0.5 0.5 0.5 0.5 0.5 0.5 0.5

AVAILABLE OPTIONS

Control Voltage

A: 90-280 VAC

D: 4-32 VDC

AxxxxE: 18-36 VAC

Rated Load Current

10: 10 Amps

25: 25 Amps

50: 50 Amps

75: 75 Amps

90: 90 Amps

110: 110 Amps

125: 125 Amps

Operating

Voltage

24: 24-280 VAC

Overvoltage Protection

Blank: Not Included

P: Included

Input Status LED

Blank: Not Included

G: Included

Termination

Blank: Screw

F: Quick Connect

(Up to 50 Amps only)

K: Hex standoffs

EA P G

Thermal Pad

Blank: Not Included

H: Included

K H

Snubber

Blank: Not Included

S: Included

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On

-10

(4)(3)

(1)

(2)

Series 1 240 VAC

• Ratings from 10A to 125A @ 24-280 VAC

• SCR output for heavy industrial loads

• Zero voltage or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

• AC or DC control

• Direct bond copper substrate

• EMC compliant to Level 3

• Direct power lead frame

• Epoxy free design

PRODUCT SELECTION

Control Voltage 10A 25A 50A 75A 90A 110A 125A

3-32 VDC D2410 D2425 D2450 D2475 D2490 D24110 D24125

90-280 VAC A2410 A2425 A2450 A2475 A2490 A24110 A24125

18-36 VAC A2410E A2425E A2450E A2475E A2490E A24110E A24125E

Required for valid part number

For options only and not required for valid part number

Not all part number combinations are available.

Contact Crydom Technical support for information on

the availability of a specific part number.

Do not forget to visit us at: www.crydom.com

Datasheet

Panel Mount

Summary of content (8 pages)

PAGE 1
Panel Mount Datasheet Series 1 240 VAC • Ratings from 10A to 125A @ 24-280 VAC • SCR output for heavy industrial loads • Zero voltage or instantaneous turn-on outputs • UL/CSA/VDE Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers • AC or DC control • Direct bond copper substrate • EMC compliant to Level 3 • Direct power lead frame • Epoxy free design For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 3-32 VDC 90-280
PAGE 2
Panel Mount Datasheet INPUT SPECIFICATIONS (5) Description D24xx Control Voltage Range Maximum Reverse Voltage Minimum Turn-On Voltage Must Turn-Off Voltage Minimum Input Current [mA] Maximum Input Current [mA] Nominal Input Impedance [Ohms] Maximum Turn-On Time [msec] Maximum Turn-Off Time [msec] 3-32 VDC -32 VDC 3.0 VDC (9) 1.
PAGE 3
Panel Mount Datasheet MECHANICAL SPECIFICATIONS (5) Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.19 [4.9] DIA. 1 2 2.25 [57.3] 1.7 [43.2] S O L I D S TAT E R E L AY 4 Hex Standoff Termination (“K” Option) (2) 1.88 [47.6] OUTPUT INPUT 1.58 [40.2] 0.49 [12.4] 1 1.88 [47.6] OUTPUT Faston Terminal(16) 0.25 x 0.032 INPUT 1.40 [35.6] 1.
PAGE 4
Panel Mount Datasheet SURGE CURRENT INFORMATION 25 A 250 100 200 Surge Current (Amp) Surge Current (Amp) 10 A 120 80 60 40 20 0 0.01 0.1 1 Surge Duration (Secs) 150 100 50 10 0 0.01 10 900 800 700 600 500 400 300 200 100 0 0.01 0.1 50 A Surge Current (Amp) Surge Current (Amp) 500 400 300 200 100 0.1 1 Surge Duration (Secs) 0.1 90 A 1 Surge Duration (Secs) 10 110 A 1500 Surge Current (Amp) 1200 Surge Current (Amp) 1200 1050 900 750 600 450 300 150 0 0.01 10 75 A 600 0 0.
PAGE 5
Panel Mount Datasheet THERMAL DERATE INFORMATION 10 A 3ºC/W 25 A 5ºC/W 1.5ºC/W No Heatsink 6 4 2 20 30 40 50 60 70 Ambient Temperature (ºC) 20 15 10 5 0 80 20 30 40 50 60 70 Ambient Temperature (ºC) 1ºC/W 0.5ºC/W 1.5ºC/W Load Current (Amps) 60 45 30 15 0 20 30 40 50 60 70 Ambient Temperature (ºC) 80 90 80 70 60 50 40 30 20 10 0 0.7ºC/W 20 10 20 30 40 50 60 70 Ambient Temperature (ºC) 110 A 1ºC/W 0.5ºC/W 1.5ºC/W 20 30 40 50 60 70 Ambient Temperature (ºC) 80 125 A 0.
PAGE 6
Panel Mount Datasheet AGENCY APPROVALS EN60950 : Meets the requirements of sections 1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 IEC 61000-4-4 : Electrically Fast Transients – Level 3 IEC 61000-4-5 : Electrical Surges – Level 3 IEC 60068-2-6 : Vibration 0.33mm and 0.
PAGE 7
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 8
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.