Datasheet

SeriesOne DR Series
• Ratings 3 Amps
• Load voltage ratings of 1-60VDC, 1-100VDC, 24-280VAC and 48-600VAC
• Fits standard 35mm DIN Rail
• LED input status indicator
• AC or DC control
• Zero Voltage (resistive loads) or Instantaneous (inductive loads) turn-on output
• UL and cUL Listed, HP Rated CE & RoHS Compliant
• UL 508 Endurance Rating for Enhanced Reliability
• UL Class I and II, Division 2, for Hazardous Locations
PRODUCT SELECTION
Control Voltage 280V, 3A 600V, 3A 60V, 3A 100V, 3A
4-32 VDC DR10D03
90-140 VAC
200-280 VAC
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS AC Output
(2)
Description DR24x03 DR48x03 DR06D03 DR10D03
Operating Voltage (3) 24-280 Vrms 48-600 Vrms 1-60 VDC 1-100 VDC
Transient Overvoltage [Vpk] 600 1200 N/A N/A
Maximum Load Current, resistive (4) 3 Arms 3 Arms 3 3
150 mArms 150 mArms 2.5 mAdc 2.5 mAdc
0.1 0.1 0.1 0.1
Minimum Load Current
500 500 N/A N/A
Maximum Surge Current (50/60Hz, 1 cycle) [Apk]
1.3 1.3 0.6 0.6
Maximum On-State Voltage Drop @ Rated Current [Vpk]
285/300 285/300 60 60
410/375 410/375 N/A N/A
Maximum I²t for Fusing (50/60 Hz, 1/2 cycle) [A² sec]
1/4 (.18) 1/4 (.18) N/A N/A
N/A 1/3 (.25) N/A N/A
18-36 VAC
DR24D03
DR24B03
DR24A03
DR48D03 DR06D03
DR24E03
Maximum Off-State Leakage Current @ Rated Voltage [mA]
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/
µsec] (5)
HP Rating UL 508/IEC60947 [HP (KW)] @ 240V
Minimum Power Factor (at Maximum Load)
Min/Max stranded wire
HP Rating UL 508/IEC60947 [HP (KW)] @ 380V
HP Rating UL 508/IEC60947 [HP (KW)] @ 480V
Min/Max solid wire
Weight (Typical)
N/A N/A1/2 (.37) N/A
0.5 0.5 N/A N/A
22/14 AWG 22/14 AWG 22/14 AWG 22/14 AWG
22/14 AWG22/14 AWG 22/14 AWG 22/14 AWG
1.76 oz. (50g) 1.76 oz. (50g)1.76 oz. (50g) 1.76 oz. (50g)
AC
Output
Only
Series
Operating Voltage
06: 1-60 VDC
10: 1-100 VDC
24: 24-280 VAC
48: 48-600 VAC
Rated Load Current
03: 3 Amps
Control Voltage
D: 4-32 VDC
A: 200-265 VAC
B: 90-140 VAC
E: 18-36 VAC (1)
0306 DDR
X
Agency Approvals
X: ATEX II 3G Ex nA IIC T4 Gc
approved
Switching Type
Blank: Zero Voltage Turn-On
(AC Output Only)
R: Instantaneous Turn-On
(AC Output)
R
Required for valid part number
For options only and not required for valid part number
Datasheet
DIN Rail Mount
Do not forget to visit us at: www.crydom.com
Copyright © 2016 Crydom Inc. Specifications subject to change without notice.