Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay, 60A, 600V, Zero Voltage Switching

Page 1

www.sensata.com

DR67 SERIES | 60/75 AMPS

DIN RAIL MOUNT SOLID STATE RELAYS

Features

Applications

• 3-Phase AC Output DIN Rail Mount SSRs

• Output ratings up to 75 Amps at 600 VAC

• 2 & 3 controlled Legs option

• Built-in overvoltage protection

• Clamp Cage terminal type accepts up to 2 AWG wire size

• Fan controlled through thermistor and microprocessor to optimize fan

operation

• IP20 touch-safe housing

• AC or DC control

• cULus listed and VDE approved

• Plastic injection molding equipment

• Packaging equipment

• Industrial ovens

• Lighting control

• Professional cooking equipment

• Pump control

• Conveyor drives

• HVAC&R

Control Voltage

60A 75A

4-32 VDC

DR6760D60P DR6760D75P

90-280 VAC/VDC

DR6760A60P DR6760A75P

PRODUCT SELECTION

The DR67 is a compact 3-phase solid state relay in a DIN rail 67.5mm wide package with output ratings up to 75 Amps per channel @ 40°C. It has an integrated

fan which allows the product to achieve very high ratings while maintaining a compact design. Its built-in overvoltage protection and the overtemperature

protection make it suitable for demanding heating, motion and lighting applications.

It’s easy to install and its large cage clamp terminals allow connecting wires up to 2 AWG size on the output terminals without the use of any additional

accessories, therefore reducing installation cost and time.

UL listed and VDE certified, the DR67 is a powerful and versatile solid state relay with superior performance when compared to previous generations and

competitor products.

Introduction

Summary of content (9 pages)

PAGE 1
DR67 SERIES | 60/75 AMPS DIN RAIL MOUNT SOLID STATE RELAYS Introduction The DR67 is a compact 3-phase solid state relay in a DIN rail 67.5mm wide package with output ratings up to 75 Amps per channel @ 40°C. It has an integrated fan which allows the product to achieve very high ratings while maintaining a compact design. Its built-in overvoltage protection and the overtemperature protection make it suitable for demanding heating, motion and lighting applications.
PAGE 2
Example : DR6760A60RP ORDERING OPTIONS Description of part number example DR67 Family 60 x xx x P Operating Voltage 60 = 48-600 VAC Control Voltage D = 4-32 VDC A = 90-280 VAC/VDC Rated Load Current 60 = 60A, 3-legs 75 = 75A, 2-legs Switching Type Blank = Zero voltage turn on R = Instantaneous turn on Overvoltage Protection Required for valid part number For options only and not required for valid part number P = With internal overvoltage protection SPECIFICATIONS Output (1) Description 60
PAGE 3
Input (1) Description DR6760Dxxx DR6760Axxx Control Voltage Range 4-32 VDC 90-280 VAC/VDC Maximum Reverse Voltage -32 VDC - Minimum Turn-On Voltage 4 VDC 90 VAC/VDC Must Turn-Off Voltage 1 VDC 5 VAC/VDC Minimum Input Current (for on-state) 0.8 mA 0.6 mA Maximum Input Current 12 mA 2.8 mA Nominal Input Impedance 3.
PAGE 4
EQUIVALENT CIRCUIT BLOCK DIAGRAMS/WIRING DIAGRAMS DR6760X60 DR6760X75 L1 L2 L3 48-600 VAC, 47-440 Hz L1 L2 L3 Short circuit and overload current protection /> /> /> L2 L3 T1 T2 T3 48-600VAC L1 INPUT A3 A4 T1 T2 A5 CONTROL INPUT A6 ALARM OUTPUT INPUT CTRL 4-32VDC A2 - A1+ A2 B1 U + U - PWR SUPPLY 18-32VDC A1 4/T2 2/T1 T1 Motor Controller Application 5/L3 3/L2 1/L1 POWER SUPPLY ALARM OUTPUT T2 6/T3 T3 General Use Application T1 T2 T3 T3 M 3 DR6760X75 (2 CONTROLLED
PAGE 5
MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in inches [mm] 2.66 67.5 1.11 28.2 4X .87 22.2 1/L1 L2 L3 T1 T2 T3 3/L2 5/L3 4/T2 6/T3 48-600VAC L1 ALARM OUTPUT PWR SUPPLY 18-32VDC INPUT CTRL 4-32VDC A2 - A1+ B1 5.00 127 INPUT U + U - 3.61 91.8 2/T1 1.45 36.8 5.82 147.8 5.12 130.1 Page 5 Copyright © 2019 Sensata Technologies, Inc. www.sensata.
PAGE 6
SURGE CURRENT INFORMATION (6) 60A & 75A THERMAL DERATE INFORMATION STATUS CHART 60A & 75A MODELS Conditions 1,16 2 3, 5, 15 4, 6, 14 7 8, 11 9 10 12 Description Initial Condition. Microcontroller Start-up, white light. Stand by condition, LED is blinking blue. Control Input is Off. Control Input is On, Output is activated, temperature rises, Green LED is On, Fan goes to Maximum speed and then starts regulating the speed for optimal values. LED indicator changes to blinking red, fan is at full speed.
PAGE 7
INSTALLATION INSTRUCTIONS Push to install on DIN rail fig.1 SSR mounted on DIN rail Pu fro ll to m re DI m N ov ra e il Mounting on DIN Rail • Locate rail and align with non moveable end of DR67 DIN clip. • Using reasonable force, push DR67 in the direction of the arrow (as shown in fig.1). • For removal pull release tag by moving blade of screwdriver in direction of arrow and pull it away from DIN rail. • For models with integrated fan removal tool must be inserted from the side (as shown in fig.
PAGE 8
AGENCY APPROVALS & CERTIFICATIONS Approvals (Tested and Certified According To) E116949 40047491 UL 508 and C22.2 No. 14 EN 62314 CONFORMANCES ENVIRONMENTAL Vibration Resistance IEC 60068-2-6(7) Shock Resistance IEC IEC 60068-2-27(7) Resistances to heat and fire Amplitude Range: 10-55 Hz, Displacement 0.75mm Peak Acceleration: 15g, Duration 11ms.
PAGE 9
WARNINGS RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE • The product’s side panels may be hot, allow the product to cool before touching • Follow proper mounting instructions including torque values • Do not allow liquids or foreign objects to enter this product Failure to follow these instructions can result in serious injury, or equipment damage.