Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay H1, SPST-NO, 25A, 530V, Screw Terminal

DataSheet

Panel Mount

H12 Series

• Ratings from 25A to 125A @ 48-530 VAC

• Snubber Included

• SCR output for heavy industrial loads

• Zero turn-on or instantaneous turn-on outputs

• UL/CSA/VDE Approved, CE Compliant to EN60950-1

• Improved SEMS screw and washer

• Redesigned housing with anti-rotation barriers

For Generation 3 datasheet click here

• DC control

• Direct Bond Copper substrate

• EMC Compliant to Level 3

• Direct Power Lead Frame

• Epoxy Free Design

PRODUCT SELECTION

Control Voltage 25A 50A 75A 90A 125A

4-32 VDC H12D4825 H12D4850 H12D4875 H12D4890 H12D48125

AVAILABLE OPTIONS

Thermal Pad

Blank: Not Included

H: Included

Series

Transient Overvoltage

2D: 1200 Vpk

Rated Load Current

25: 25 Amps

50: 50 Amps

75: 75 Amps

90: 90 Amps

125: 125 Amps

Switching Type

Blank: Zero Voltage Turn-On

-10: Instantaneous Turn-On (7)

Input Status LED

Blank: Not Included

G: Included

Termination

Blank: Screw

F: Quick Connect (5)

K: Round standoffs

Operating Voltage

48: 48-530 VAC

48H1 25 K P G H -10

Overvoltage Protection

Blank: Not Included

P: Included (6)

Required for valid part number

For options only and not required for valid part number

OUTPUT SPECIFICATIONS

(1)

Description 125A90A75A50A25A

Operating Voltage (47-63Hz) [Vrms] 48-530 48-530 48-530 48-530 48-530

Transient Overvoltage [Vpk] 1200 1200 1200 1200 1200

Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 10 10 10 10

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] 500 500 500 500 500

Maximum Load Current [Arms]

(2) 25 50 75 90 125

Minimum Load Current [mArms] 150 150 150 150 150

Maximum 1 Cycle Surge Current (50/60Hz) [Apk] 239/250 597/625 954/1000 1145/1200 1670/1750

Maximum On-State Voltage Drop @ Rated Current [Vrms] 1.15 1.15 1.15 1.15 1.15

Thermal Resistance Junction to Case (Rjc) [°C/W] 0.8 0.45 0.3 0.27 0.22

Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] 285/259 1770/1629 4555/4150 6560/5976 13950/12709

Minimum Power Factor (at Maximum Load) 0.5 0.5 0.5 0.5 0.5

INPUT SPECIFICATIONS

(1)

Description DC Control

Control Voltage Range 4-32 VDC

Minimum Turn-On Voltage (3) 4.0 VDC

Minimum Turn-Off Voltage 1 .0 VDC

Minimum Input Current 7 mADC

Maximum Input Current 12 mADC

Nominal Input Impedance Current Regulated

Maximum Turn-On Time [msec] (4) 1/2 Cycle

Maximum Turn-Off Time [msec] 1/2 Cycle

Do not forget to visit us at: www.crydom.com

Summary of content (7 pages)

PAGE 1
Panel Mount DataSheet H12 Series • Ratings from 25A to 125A @ 48-530 VAC • Snubber Included • SCR output for heavy industrial loads • Zero turn-on or instantaneous turn-on outputs • UL/CSA/VDE Approved, CE Compliant to EN60950-1 • Improved SEMS screw and washer • Redesigned housing with anti-rotation barriers • DC control • Direct Bond Copper substrate • EMC Compliant to Level 3 • Direct Power Lead Frame • Epoxy Free Design For Generation 3 datasheet click here PRODUCT SELECTION Control Voltage 4-32 VDC
PAGE 2
Panel Mount DataSheet GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) 4000 Vrms 109 Ohm 8 pF -40 to 80 °C -40 to 125 °C 2.6 oz (74.9 g) UL94 V-0 Aluminum 13-15 /1.5-1.7 18-20 / 2.0-2.2 18-20 / 2.0-2.
PAGE 3
Panel Mount DataSheet MECHANICAL SPECIFICATIONS (1) Screw Termination 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] OUTPUT INPUT 1.1 [27.9] 0.49 [12.4] 0.89 [22.6] Mounting Hole/Slot 0.18 [4.5] DIA. 2 S O L I D S TAT E R E L AY 4 Round Standoff Termination (“K” Option) 1 2.25 [57.3] 1.7 [43.2] 1.88 [47.6] Mounting Hole/Slot r 0.09 [2.2] 1.0 [25.4] 1.1 [27.9] 0.49 [12.4] 1 1.88 [47.6] INPUT 1.0 [25.4] 1.75 [44.5] 1.31 [33.4] 1.1 [27.9] 0.49 [12.4] Mounting Hole/Slot 0.18 [4.5] DIA. 1 2.
PAGE 4
Panel Mount DataSheet SURGE CURRENT INFORMATION 25 A 500 Surge Current (Amp) 200 150 100 50 0 0.01 0.1 1 Surge Duration (Secs) 300 200 100 0 0.01 10 1200 1050 900 750 600 450 300 150 0 0.01 Surge Current (Amp) 0.1 1 Surge Duration (Secs) 400 10 75 A 900 800 700 600 500 400 300 200 100 0 0.01 50 A 600 0.1 1 Surge Duration (Secs) 10 90 A 0.1 1 Surge Duration (Secs) 10 125 A 1800 1600 1400 1200 1000 800 600 400 200 0 0.
PAGE 5
Panel Mount DataSheet AGENCY APPROVALS EN60950 : Meets the requirements of sections1.5: 1,7: 2.9: 2.10.5.3: 4.2: 4.5: 4.7: Designed in accordance with the requirements of IEC 62314 IEC61000-4-2 : Electrostatic Discharge – Level 3 IEC61000-4-4 : Electrically Fast Transients – Level 3 IEC61000-4-5 : Electrical Surges – Level 3 IEC 60068-2-6 : Vibration 0.35mm and 0.
PAGE 6
Panel Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Panel Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.