Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Single Phase HDC, SPST-NO, 160A, 150V, Screw Terminal

HDC Series

• Ratings of 120A and 160A @ 48, 72 & 150 VDC

• LED Status Indicator

• Heavy Duty Stud Terminals

• AC or DC control

• Micro Seconds Turn-On and Off times

• Low On-State Voltage Drop

• PWM to 1 kHz for DC Input Models

PRODUCT SELECTION

Control Voltage 120A 160A

4.5-32 VDC HDC60D120, HDC100D120, HDC200D120 HDC60D160, HDC100D160, HDC200D160

90-140 VAC HDC60A120, HDC100A120, HDC200A120 HDC60A160, HDC100A160, HDC200A160

AVAILABLE OPTIONS

Series

HDC 100

Operating Voltage

60: 7-48 VDC

100: 7-72 VDC

200: 7-150 VDC

Control Voltage

A: 90-140 VAC

D: 4.5-32 VDC

120

Rated Load Current

120: 120 Amps

160: 160 Amps

Thermal Pad

Blank: Not Included

H: Included

Required for valid part number

For options only and not required for valid part number

OUTPUT SPECIFICATIONS

(1)

HDC100x160HDC100x120Description HDC60x160HDC60x120 HDC200x160HDC200x120

Operating Voltage [Vdc] 7-72 7-727-48 7-48 7-150 7-150

Blocking Voltage [Vdc] 100 10060 60 200 200

Rated Load Current [A] (2) 120 160120 160 120 160

Rated Load Current {UL 508 Motor Controller} [FLA] 17 FLA / 2 HP 25 FLA / 3 HP

Rated Load Current {IEC 60947-4-1 DC-1} [Adc](4, 5) 120 (≤ 72 VDC) 160 (≤ 72 VDC)120 (≤ 48 VDC) 160 (≤ 48 VDC) 120 (≤ 150 VDC) 160 (≤ 150 VDC)

Rated Load Current {IEC 60947-4-1 DC-3} [FLA](4, 5) 17 (≤ 72 VDC) 25 (≤ 72 VDC)17 (≤ 48 VDC) 25 (≤ 48 VDC) 17 (≤ 150 VDC) 25 (≤ 150 VDC)

Minimum Load Current [mA] 2.5 2.52.5 2.5 2.5 2.5

Maximum Surge Current (10ms) [Adc] 360 470360 470 1200 1600

Maximum Off-State Leakage Current @ Rated Voltage [mA] 0.15 0.150.1 0.1

0.2 0.2

Maximum On-State Voltage Drop @ Rated Current [VDC] 0.52 0.560.53 0.56 0.72 0.64

Thermal Resistance Junction to Case (Rjc) [°C/W] 0.42 0.360.42 0.36 0.25 0.23

Maximum On-State Resistance @ Rated Current (RDS-ON) [mOhms] 4.32 3.54.32 3.5 6.0 4.0

Wire Size max (solid/stranded) [AWG/ IEC mm²] 2/0 / 67.4 2/0 / 67.42/0 / 67.4 2/0 / 67.4 2/0 / 67.4 2/0 / 67.4

Output Terminal Nut Torque Range [in lb (Nm) 225-300 (25.4-33.9) 225-300 (25.4-33.9)225-300 (25.4-33.9) 225-300 (25.4-33.9) 225-300 (25.4-33.9) 225-300 (25.4-33.9)

Maximum PWM (Hz) (3) 1000 10001000 1000 1000 1000

INPUT SPECIFICATIONS

(1)

HDC60A & HDC100AHDC60D & HDC100DDescription

HDC200AHDC200D

Control Voltage Range 4.5-32 VDC 90-140 VAC 4.5-32 VDC 90-140 VAC

Must Turn-Off Voltage 4.2 VDC 35 VAC 4.2 VDC 35 VAC

Minimum Input Current @ Minimum Voltage (for on-state) 23 mA 31 mA 23 mA 31 mA

Maximum Input Current @ Maximum Voltage 45 mA 33 mA 45 mA 33 mA

Nominal Input Impedance Current Regulated Current Regulated Current Regulated Current Regulated

Maximum Turn-On Time at min voltage 90.5 µs 6 ms 92 µs 6 ms

Maximum Turn-On Time at max voltage 8.5 µs 4 ms 12.0 µs 4 ms

Maximum Turn-Off Time at min voltage 145 µs 9.2 ms 195 µs 9.2 ms

Maximum Turn-Off Time at max voltage 330 µs 9.2 ms 405 µs 9.2 ms

Terminal Type / size in (mm) QC / 0.187 (4.75) QC / 0.187 (4.75) QC / 0.187 (4.75) QC / 0.187 (4.75)

Datasheet

Panel Mount

Do not forget to visit us at: www.crydom.com

Summary of content (7 pages)

PAGE 1
Panel Mount Datasheet HDC Series • Ratings of 120A and 160A @ 48, 72 & 150 VDC • LED Status Indicator • Heavy Duty Stud Terminals • AC or DC control • Micro Seconds Turn-On and Off times • Low On-State Voltage Drop • PWM to 1 kHz for DC Input Models PRODUCT SELECTION Control Voltage 4.5-32 VDC 90-140 VAC 120A 160A HDC60D120, HDC100D120, HDC200D120 HDC60A120, HDC100A120, HDC200A120 HDC60D160, HDC100D160, HDC200D160 HDC60A160, HDC100A160, HDC200A160 AVAILABLE OPTIONS Control Voltage A: 90-140 VAC D: 4.
PAGE 2
Panel Mount Datasheet GENERAL SPECIFICATIONS (1) Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) Minimum Insulation Resistance (@ 500 VDC) 2500 Vrms 109 Ohm 10 pF -30 to 80 °C -40 to 125 °C 85% non-condensing 0.75/340.2 PBT 30% GF, UL 94 V-0 18-20 (2-2.
PAGE 3
Panel Mount Datasheet WIRING DIAGRAM Input Control Circuit + / L1 (+ / ) Output Control Status Indicator (– / ) – / L2 THERMAL DERATE INFORMATION HDC60x160 & HDC100x160 HDC60x120 & HDC100x120 0.4 ºC/W 1.0 ºC/W 120 160 100 140 120 Load Current (Amps) Load Current (Amps) 0.
PAGE 4
Panel Mount Datasheet PWM DERATE INFORMATION HDC60D120 & HDC100D120 0.5 ºC/W HDC60D160 & HDC100D160 0.5 ºC/W 1.0 ºC/W 100 Load Current (Amps) Load Current (Amps) 120 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 PWM Frequency (Hz) 160 140 120 100 80 60 40 20 0 0 100 200 300 400 500 600 700 800 900 1000 PWM Frequency (Hz) HDC200D120 0.5 ºC/W HDC200D160 0.4 ºC/W 1.
PAGE 5
Panel Mount Datasheet AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 IEC 61000-4-2 : Electrostatic Discharge – Level 3 (Criteria A) IEC 61000-4-4 : Electrically Fast Transients – Level 3 (Criteria A) IEC 61000-4-5 : Electrical Surges – Level 3 (Criteria A) IEC 60068-2-6 : Vibration 0.33mm and 0.
PAGE 6
Panel Mount Datasheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 7
Panel Mount Datasheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.