Datasheet

ManualsBrandsSensata Crydom ManualsRelay AccessoriesCovering cap, clear

DataSheet

SSR Accesories

Do not forget to visit us at: www.crydom.com

PROTECTIVE COVERS

PRODUCT DESCRIPTION

The KS100, KS100-SMR, KS101 and KS300 are protective covers made of clear polycarbonate material, which are designed to fit over

standard CRYDOM SSRs.

They provide added protection from electric shock when installing or checking equipment.

•

Protective covers designed for use with Crydom single phase

and 3-phase solid-state relays and contactors

Protective Covers

KS100

KS101

KS300

Gen 3 Protective Cover

Part no. KS100

The KS100 protective cover is suitable for all single

phase panel mount Generation 3 Solid State Relays

KS100-SMR

MC and SMR Series Protective Cover

Part no. KS100-SMR

The KS100-SMR protective cover is suitable for all single

phase panel mount MC and SMR Series Solid State Relays

Gen 4 Protective Cover

Part no. KS101

The KS101 protective cover is suitable for all single

phase panel mount Generation 4 Solid State Relays

3-Phase Protective Cover

Part no. KS300

The KS300 protective cover is suitable for all 3-phase

panel mount 53TP IP00 Solid State Contactors

Summary of content (5 pages)

PAGE 1
SSR Accesories DataSheet PROTECTIVE COVERS • Protective covers designed for use with Crydom single phase and 3-phase solid-state relays and contactors PRODUCT DESCRIPTION The KS100, KS100-SMR, KS101 and KS300 are protective covers made of clear polycarbonate material, which are designed to fit over standard CRYDOM SSRs. They provide added protection from electric shock when installing or checking equipment. Protective Covers KS101 Gen 4 Protective Cover Part no.
PAGE 2
SSR Accesories DataSheet USE GUIDE Be careful when installing the plastic cover to ensure maximum protection. Put the protective cover over the relay and apply pressure evenly to fit into place. No tools are needed to remove the plastic cover from the relay. DESIGN ADVANTAGE CRYDOM KS100, KS100-SMR, KS101 and KS300 protective covers have been designed especially for Crydom Solid State Relays, and are easy to install. The polycarbonate material used is UVL94V-0 approved.
PAGE 3
SSR Accesories DataSheet MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] KS101 1.75 [44.3] Ø.29 [7.3] (2 places) 0.48 [12.1] (2 places) 1.10 [27.9] 0.35 [8.9] 1.70 [43.2] 1.87 [47.4] 0.92 [23.4] 2.36 [60.1] 1.36 [34.6] 0.53 [13.5] 0.58 [14.8] 1.0 [25.4] Ø.24 [6.1] (2 places) 0.29 [7.4] KS300 0.45 [11.3] 0.63 [15.9] 0.25 [6.4] 0.79 [20.1] 0.79 [20.1] Ø.52 [13.1] (4 places) 0.40 [10.2] 1.81 [45.8] Ø.25 [6.4] (Places) 1.15 [29.2] 0.
PAGE 4
SSR Accesories DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 5
SSR Accesories DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.