Datasheet

ManualsBrandsSensata Crydom ManualsRelaysSolid State Relay Single Phase LS, SPST-NO, 12A, 280V, THT

DataSheet

PCB Mount

LS Series

• SIP SSR

• Ratings to 12A @ 280 VAC

• SCR output for heavy industrial loads

• DC control

• Zero Voltage Turn-on (resistive loads) or Instantenous Turn-on (inductive loads)

output

PRODUCT SELECTION

Control Voltage 8A 12A

4-10 VDC

20-28 VDC

AVAILABLE OPTIONS

OUTPUT SPECIFICATIONS

(1)

Description LS240D8

Operating Voltage (47-63Hz) [Vrms]

Transient Overvoltage [Vpk]

Maximum Surge Current (16.6ms)[Apk]

Maximum On-State Voltage Drop @ Rated Current [Vpk]

Do not forget to visit us at: www.crydom.com

LSE240D8

LS240D8 LS240D12

Series

Control Input Voltage

D: DC Input

Operational Voltage

240: 24-280 VDC

DLS

Operational Current

8: 8 Amps

Switching Type

Blank: Zero Voltage Turn-On

R: Instantaneous Turn-On

Control Voltage

Blank: 4-10 VDC

E: 20-28 VDC

Required for valid part number

For options only and not required for valid part number

Maximum Off-State Leakage Current @ Rated Voltage [mArms]

Minimum Off-State dv/dt @ Maximum Rated Voltage [V/

µsec] (2)

Minimum Power Factor (with Maximum Load)

Thermal Resistance Junction to Case (Rjc) [°C/W]

LSE240D12

240

12: 12 Amps

Maximum Load Current [Arms](3)

Minimum Load Current [Arms]

LS240D12

24-280

600

0.1

500

0.15

2.2

24-280

120

1.6

0.5

2.0

0.5

600

0.1

500

0.15

1.6

Summary of content (5 pages)

PAGE 1
PCB Mount DataSheet LS Series • SIP SSR • Ratings to 12A @ 280 VAC • SCR output for heavy industrial loads • DC control • Zero Voltage Turn-on (resistive loads) or Instantenous Turn-on (inductive loads) output PRODUCT SELECTION Control Voltage 4-10 VDC 20-28 VDC 8A 12A LS240D8 LSE240D8 LS240D12 LSE240D12 AVAILABLE OPTIONS Operational Current 8: 8 Amps 12: 12 Amps Operational Voltage 240: 24-280 VDC Series E LS 240 D Control Voltage Blank: 4-10 VDC E: 20-28 VDC 12 R Control Input Voltage D: D
PAGE 2
PCB Mount DataSheet INPUT SPECIFICATIONS (1) Description Control Voltage Range Must Turn On Voltage Must Turn Off Voltage Typical Input Current @ Nominal Voltage Nominal Input Impedance Maximum Turn-on Time [msec] Maximum Turn-Off Time [msec] LS LSE 4-10 VDC 4.0 VDC 1.0 VDC 15 mADC 270 Ohm 1/2 Cycle 1/2 Cycle 20-28 VDC 20 VDC 1.
PAGE 3
PCB Mount DataSheet MECHANICAL SPECIFICATIONS Tolerances: ±0.02 in / 0.5 mm All dimensions are in: inches [millimeters] 0.45 [11.4] 1.22 [31.0] 1.05 [26.5] 0.52 [13.1] Ø 0.14 [3.6] 0.40 [10.2] 0.15 [3.7] LS240D12 0.90 [22.7] 12A 1 240VAC ~ 2 0.16 [4.1] 4-10VDC +3 -4 0.16 [4.0] .032 [0.8] 0.11 [2.9±.25] 0.30 [7.6] 0.40 [10.2] 0.032 ± .005 SQ. [.80 ±.13] (4 Places) 0.44 [11.1] 0.20 [5.1] 1.40 [35.
PAGE 4
PCB Mount DataSheet DANGER / PELIGRO / DANGER /GEFAHR / PERICOLO / 危险 HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH. • Disconnect all power before installing or working with this equipment. • Verify all connections and replace all covers before turning on power. Failure to follow these instructions will result in death or serious injury. RIESGO DE DESCARGA ELECTRICA O EXPLOSION. • Desconectar todos los suministros de energia a este equipo antes de trabajar con este equipo.
PAGE 5
PCB Mount DataSheet ANNEX - ENVIROMENTAL INFORMATION The environmental information disclosed in this annex including the EIP Pollution logo are in compliance with People’s Republic of China Electronic Industry Standard SJ/T11364 – 2006, Marking for Control of Pollution Caused by Electronic Information Products.