Spec Sheet

Page 1

www.sensata.com

12LP10 SERIES

INVERTER

PURE SINE WAVE OUTPUT

Features

• GFCI Outlet – Provides 120 VAC output as well as

receptacle protection.

• Unit Protection – Provides automatic electronic short circuit/

overload protection, automatic over-temperature shutdown,

and an AC output circuit breaker.

• Status LED – Provides inverter operation mode and

troubleshooting information at a glance.

• Low Battery Protection – Automatically shuts down at

10.5 VDC with in-rush delay. The end user may also select

an optional setting of 11.7 VDC.

• Battery Surge Protection – The 12LP10 has an input DC

voltage range of 10.5 - 16 volts. The inverter can tolerate up

to 24 VDC for five minutes, then will shut down to preserve

the system.

• Auto Sleep Mode – Auto sleep mode helps preserve battery

life over long periods of no load operation.

Introduction

The Dimensions 12LP10 Series Inverter from Sensata Technologies provides pure sine wave power in a compact chassis to help power all of your

sensitive electronic loads.

Model Numbers

• 12LP10

• 12LP10H

• 12LP10HR

• 12LP10R

Pure Sine Wave

PAGE 1
2LP10 SERIES | INVERTER PURE SINE WAVE OUTPUT Introduction The Dimensions 12LP10 Series Inverter from Sensata Technologies provides pure sine wave power in a compact chassis to help power all of your sensitive electronic loads. Features • GFCI Outlet – Provides 120 VAC output as well as receptacle protection. • Unit Protection – Provides automatic electronic short circuit/ overload protection, automatic over-temperature shutdown, and an AC output circuit breaker.
PAGE 2
SPECIFICATIONS 12LP10 12LP10H NO GFCI, HARDWIRE ONLY 12LP10HR NO GFCI, HARDWIRE ONLY, LOCAL ON/OFF SWITCH DISABLED 12LP10R LOCAL ON/OFF SWITCH DISABLED Input battery voltage range 10.5 - 16 VDC 10.5 - 16 VDC 10.5 - 16 VDC 10.5 - 16 VDC Surge voltage Up to 24 VDC Up to 24 VDC Up to 24 VDC Up to 24 VDC Nominal AC output voltage 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% 120 VAC ± 5% Output frequency and accuracy 60 Hz ± 0.5% 60 Hz ± 0.5% 60 Hz ± 0.5% 60 Hz ± 0.
PAGE 3
Page 3 Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices.