Product Manual

ManualsBrandsSensata Technologies ManualsSolar & Wind Power4800 Watt, 24V Inverter - N series, O Chassis

DC to AC Power Inverters

Models:

24/2200N

24/3300N

24/4800N

Including Options: A, B1, D, R, T, T1

ISO 9001:2000 Certified Company

Manufacturer of Dimensions

Inverters

4467 White Bear Parkway

St. Paul, MN 55110

Phone: 651-653-7000 Fax: 651-653-7600

E-mail: inverterinfo@sensata.com

Web: www.dimensions.sensata.com

OWNER'S MANUAL FEBRUARY 2007

121478C

Form 121478

Summary of content (8 pages)

PAGE 1
21478C Manufacturer of DimensionsTM Inverters 4467 White Bear Parkway St. Paul, MN 55110 Phone: 651-653-7000 Fax: 651-653-7600 E-mail: inverterinfo@sensata.com Web: www.dimensions.sensata.
PAGE 2
spark. Do not mount in a confined battery or gas compartment. CAUTION: Working in the vicinity of leadacid batteries is dangerous. Batteries generate explosive gases during operation. There is a risk of acid exposure. There is also a risk of high current discharge from shorting the battery that can cause fire and explosion. CAUTION: Be sure the inverter and, if used, the external AC input circuit breaker or fuse are turned "OFF" during installation.
PAGE 3
CAUTION: Damage to the inverter will occur if an external AC power source is applied to the inverter’s AC outlet or its hardwire output. CAUTION: Be sure the inverter's circuit breaker or fuse (if needed) are turned "OFF" during installation. NOTE: All wiring must follow the National Electric Code, Provincial or other codes in effect at the time of installation, regardless of suggestions in this manual. All wires should be copper conductors. 3.03 Mounting 3.03.
PAGE 4
a remote switch may be connected to the violet wire marked "Remote Switch Hookup" in the wiring compartment. Disconnect the violet wire from the battery positive input terminal. Connect the violet wire to the load side of the remote switch. The line side of the switch must be connected to the +24 VDC power source with a fuse within 18" of the source. The cable clamp strain relief should be used to secure the field wires. 3.06.
PAGE 5
inverter’s output loads, and turns “Off” the inverter. The second circuit activates the battery charger and also turns “Off” the inverter. Both the transfer switch input and the battery charger input must be the same phase. Charger Ratings Model Input 120VAC, 60Hz Output_ 24/2200N Up to 20 Amp AC 50 Amp DC 24/3300N Up to 30 Amp AC 75 Amp DC 24/4800N Up to 30 Amp AC 100 Amp DC 4. START UP / OPERATION 4.
PAGE 6
c) The High temperature light indicates the inverter has overheated. The unit will automatically turn back on when it has o o cooled to 40 C (104 F). Verify that the inverter is not in a closed compartment and that the fan is not blocked. 5.03 When the battery charger fails to operate correctly check the inverter trouble shooting procedure in 5.
PAGE 7
FIG. 1 INSTALLATION WIRING WARNING: CONNECTING THE BATTERY WITH THE WRONG POLARITY TO THE INVERTER WILL CAUSE DAMAGE THAT IS NOT COVERED UNDER THE WARRANTY. A.C. A.C. Input Output Transfer Battery Charger REMOTE FUSE POS NEG C VD 24 A.C OUTPUT A.C. INPUT ("B1" Option) A.C.
PAGE 8
Limited Warranty Terms & Conditions SHIPPING TERMS: F.O.B. St. Paul Minnesota. Freight prepaid and billed, subject to prior credit approval. MINIMUM ORDER: $50.00 Net Price LOSS OR DAMAGE: Loss or damage in transit are the responsibility of the carrier. Any claim should be filed with the delivering transport company. Invoice, Bill of Lading and Delivery receipt with damage noted therein must accompany any claims for freight damage.