User's Manual

Strips MS-H Article # 1302002

Strips MS-WL Article # 1301002

User Manual

User commands

1. Sending open frame

Move the magnet to the rounded edge 3 times (

see 3 green LED blinks at Sensative logo )

1 short blink means the frame was

sent (success)

5 red means there was no

acknowledgment from the gateway

2. Factory reset

To reset the device to the factory settings, move the

magnet to the rounded edge 3 times, and on the 3rd

pass hold the magnet for 10 seconds. One long green

LED blink means reset was successful