User's Manual

Executing a flight
Note: If the dronedetects a condition that preventscorrect take-off a
Take-off veto will be displayed in eMotion and the statusLED will start
pulsing blue. The eBee Extended User Manual describes the possible
Take-off veto messages and the user action that should be taken to
remove them. For example, if the drone is not oriented horizontally
the status LED will start pulsingblue until you re-orient it horizontally,
at which point the status LED turns solid green again.
Caution: It is imperative to launch the drone directly against the
wind, otherwise it will be unable to gain enough speed during take-
off and likely crash. Likewise, launching the drone in high winds
above the specified safe wind speed of 12 m/s is dangerous and can
result in a crash.
shake 3x
n
o
h
o
l
d
i
n
g
z
o
n
e
d
a
n
g
e
r
z
o
n
e
shake 3x
motor startup begin
green
solid
status LED:
blue
pulse
status LED:
Step 2: Switch the motor on
Shake the eBee back and forth 3 times longitudinally (within approx. 3 seconds)
to begin the motor power-up sequence. The status LED will pulse blue until the
motor is at full power and ready for take-off.
Note: You do not need to hurry to launch the drone. In case you want
toshut off the motor, justrepeatthe back and forthactionthree times
and the motor will stop.
43