User Manual

ManualsBrandsSensei ManualsLens Accessories55mm Quick Clip Lens Hood

QUICK CLIP LENS HOODS

User Manual

LH-QC52, LH-QC55, LH-QC58, LH-QC62,

LH-QC67, LH-QC72, LH-QC77, LH-QC82

Summary of content (10 pages)

PAGE 1
QUICK CLIP LENS HOODS LH-QC52, LH-QC55, LH-QC58, LH-QC62, LH-QC67, LH-QC72, LH-QC77, LH-QC82 User Manual
PAGE 2
Thank you for choosing Sensei. The Sensei Quick Clip Lens Hood mounts securely to your camera lens to prevent stray light from entering, thus eliminating glare and lens flare. This specially-designed lens hood allows for quick mounting with a simple press and click. The lens hood is easy to reverse for storage or when you want it out of the way. It rotates on the Quick Clip lens ring for top and bottom orientation and it minimizes damage caused by impacts.
PAGE 3
Overview Quick Clip Lens Ring Quick Clip Lens Hood Top Ball Bearing Rail Ball Bearings Lens Thread Bottom Filter Thread 2
PAGE 4
Instructions Note: For use with internal focusing lenses and nonrotating filters. Do not use with thin filter widths, as they may be difficult to remove. Accommodates lenses with widest focal length of 20 mm for full frame and 15 mm for crop sensors. Using center pinch lens caps are recommended. 1. Remove the Quick Clip Lens Ring from the lens hood by p re ss i n g o n t h e ring from the inside of the hood until it pops out.
PAGE 5
2. Align the lens thread on the Quick Clip Lens Ring with the thread on the front of your cameras lens. 3. T u r n t h e r i n g clockwise until it is securely fastened onto the lens.
PAGE 6
4. Position the Quick Clip Lens Hood with the label TOP aligned with the top of the lens. 5. Firmly press the lens hood onto the lens ring until it clicks into place.
PAGE 7
TOP 6. To reverse the hood, remove it from the ring, reverse the orientation and press it into place.
PAGE 8
One-Year Limited Warranty This SENSEI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
PAGE 9
To obtain warranty coverage, contact the Sensei Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Sensei along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense. For more information or to arrange service, visit www.madebysensei. com or call Customer Service at 212-594-2353. Product warranty provided by the Gradus Group. www.gradusgroup.