User manual

12
D Note:
Check if the sieve in the centre of the pod
holder is clogged. If this is the case, unclog the
sieve by rinsing the pod holder under the tap.
If necessary, use a washing-up brush to clean
the sieve
7 Clean the water distribution disc and the
rubber sealing ring with a moist cloth.
C
Caution:
Do not remove the rubber sealing ring and
be careful not to damage the tab on the
water distribution disc.
8 Clean the water inlet on the machine with a
moist cloth.
4 To remove the coffee spout, press the release
buttons (1) and pull the coffee spout off the
machine (2).
5 To disassemble the coffee spout, grab the
two ridges of the inner part of the spout and
squeeze them lightly (1). Move the inner part
downwards to remove it from the outer part
of the spout (2).
6 Clean the water reservoir and its lid, the
coffee spout, the coffee collector, the drip tray,
the cup tray and the pod holders in hot water
or in the dishwasher.
C
Caution:
Be careful not to damage the valve in the
bottom of the water reservoir if you use
a washing-up brush to clean the water
reservoir.