User manual
5 Press the 1-cup button and the 2-cup button simultaneously for 1
second to start the rinsing cycle.
, The activity light and the CALC CLEAN light ash slowly.
, During the ushing cycle, water comes out of the coffeemaker in a
continuous ow.
6 When the activity light goes out, the ‘water tank empty’ light goes on
and the CALC CLEAN light ashes quickly, empty the bowl and rinse
and ll the water tank.
7 Press the 1-cup button and the 2-cup button simultaneously for 1
second to start the second rinsing cycle.
, When all the water in the water tank has been used up, the
complete descaling procedure is nished and the coffeemaker
switches off.
Do not interrupt the rinsing cycles.
Note: If you switch off the coffeemaker before the coffeemaker has completed
two rinsing cycles, the CALC CLEAN light starts ashing quickly when you
switch on the coffeemaker. In that case, you have to perform two rinsing cycles
to make the CALC CLEAN light go out.
ENGLISH26
4203_000_7242_1_DFU Booklet_Lux_A5_v2.indd 26 5/29/12 5:50 PM