User manual

2 Pull the round AROMA LOCK
®
seal off the bean-funnel.
3 Insert the screw thread of the bean-funnel properly into the opening
in the top of the coffeemaker (1). Then turn the bean-funnel clockwise
to fasten it (2).
4 When the ‘bean-funnel empty’ light goes on, the bean-funnel is empty.
5 To replace the empty bean-funnel with a full one, turn the bean-funnel
anticlockwise (1) and remove it (2). Then perform step 1 to place a
new full bean-funnel on the coffeemaker.
Note: You can also remove a Douwe Egberts SENSEO
®
SARISTA bean-funnel
that is not yet empty and replace it with another one if you want to switch to
a different coffee blend. Because the bean-funnel is re-closed, you can store the
used bean-funnel for later use.
Never remove the bean-funnel when the coffeemaker is brewing coffee.
Preparing for use
Filling the water tank
Fill the water tank with fresh water before each use.
ENGLISH8
4203_000_7242_1_DFU Booklet_Lux_A5_v2.indd 8 5/29/12 5:49 PM