User manual

Note: The ‘water tank empty’ light goes on when there is not enough water in
the water tank to brew one cup of coffee.
1 Remove the water tank from the coffeemaker.
2 Rinse the water tank under the tap.
3 Fill the water tank with cold tap water up to the MAX indication.
cause damage to the water tank and the coffeemaker.
4 Slide the water tank back into the coffeemaker.
Automatic rinsing cycle
The coffeemaker automatically performs a rinsing cycle every time you
switch it on. This guarantees that you always get the full aroma from the
coffee beans in the Douwe Egberts SENSEO
®
SARISTA bean-funnel..
Note : You can interrupt the automatic rinsing cycle by pressing the 1-cup,
2-cup, or jug button. The machine still needs to warm up before you start
brewing coffee, but will not perform a rinsing cycle.
Note: The coffeemaker will not perform a rinsing cycle in case you switch the
appliance on within 8 minutes after the coffeemaker has been switched off.
1 Slide the detachable coffee spout into the coffeemaker.
2 Insert the plug into the wall socket.
3 Place a cup on the drip tray cover.
ENGLISH 9
4203_000_7242_1_DFU Booklet_Lux_A5_v2.indd 9 5/29/12 5:49 PM