User's Manual
32
Eversense CGM User Guide
• During smart transmitter charging:
LED Status Battery Status Action
Solid orange when connected to the USB cable Not yet fully charged Continue charging until complete
Solid green when connected to the USB cable 100% charged Disconnect from power supply
LED Status Status Action
Alternating green and orange when power button
is pressed 3 times in 5 seconds
Discoverable mode
Pair smart transmitter with mobile
device
Does not blink when power button is pressed Smart transmitter o
Hold down power button for
5seconds to turn on
Blinks green (once) when power button is pressed 10% - 90% battery power No immediate action required
Blinks orange (once) when power button is pressed Low battery, less than 10% battery power remaining Charge battery soon
LED is orange for one minute An alert has been triggered
Check the app on your mobile device
to understand the alert
• During smart transmitter use:
LED Status Indicators
The smart transmitter communicates several dierent states based upon the color of the LED.
LBL-0202-01-001 Rev 1_Eversense User Guide_mgdL_R6.indd 32 7/22/16 11:39 AM