User's Manual

126
Eversense CGM User Guide
18
Q: My smart transmitter is not listed on the
CONNECT screen?
A: The smart transmitter will not be listed on the
CONNECT screen for any of the following reasons:
• The smart transmitter is currently charging
via USB.
• The smart transmitter is turned OFF.
• The smart transmitter battery is completely
drained.
• Bluetooth on your mobile device is turned OFF.
• Smart transmitter pairing to your mobile device
has not been established or has been “un-paired”.
You must re-establish pairing.
Q : I just received a new smart transmitter. How do
I unlink the old one and link the new one to my
sensor?
A: On the Main Menu, tap Connect. Tap and hold the
name of your old smart transmitter. Tap OK to stop
the app from automatically connecting with the old
smart transmitter. Follow the steps in this User Guide
for pairing the new smart transmitter with the app
and linking it to your sensor.
Calibration
Q: Will doing more than 2 fingerstick calibrations
per day aect the accuracy of the system?
A: The accuracy will not be negatively impacted if you
do more than the required 2 calibrations per day.
Q: When should I do a fingerstick test with a blood
glucose meter?
A: You should perform a blood glucose test on a meter:
• When it is time to calibrate.
• When you cannot get sensor glucose readings.
• Any time you have reached your low or high
glucose alert thresholds.
• Any time you have symptoms of low or high blood
glucose.
• Any time your symptoms are not consistent with
the sensor glucose readings.
• Prior to making treatment decisions, such as
dosing insulin or consuming carbohydrates.
LBL-0302-01-101 Rev 1_Eversense User Guide_mmolL_R5.indd 126 11/4/16 2:44 PM