User's Manual

39
Eversense CGM User Guide
5
Smart Transmitter Care and Maintenance
• Keep the smart transmitter and charging cradle clean (free of visible dirt) and protected when not in use. Wipe the
outside with a cloth between uses to keep clean.
• Charge the smart transmitter when the battery power is low.
• Use only the power supply supplied with your system to charge the smart transmitter battery. Using a power
supply other than one provided by Senseonics may void your smart transmitter warranty. DO NOT use the power
supply if it is damaged in any way.
To clean your smart transmitter, wipe it down with a water dampened cloth; dispose of the cloth according to your
local regulations. Dispose of the smart transmitter and all other system components according to local regulations.
Battery Indicator
The smart transmitter battery power can be checked using the app, or on the smart transmitter itself.
With the app:
• Tap Menu > About > My Transmitter. Scroll down to the Battery Level line that indicates amount of
battery left.
Or
• Check the battery icon on the upper right corner on the MY GLUCOSE screen. A red battery icon indicates
the smart transmitter battery is empty.
With the smart transmitter:
• With the smart transmitter ON, press and release the power button. The LED will blink green once if the battery
is charged. The LED will blink orange once if the battery is low. See the next page for more information on the
LED indicators.
LBL-0302-01-101 Rev 1_Eversense User Guide_mmolL_R5.indd 39 11/4/16 2:44 PM