User's Manual

40
Eversense CGM User Guide
5
• During smart transmitter charging:
LED Status Battery Status Action
Solid orange when connected to the
USB cable
Not yet fully charged Continue charging until complete
Solid green when connected to the
USB cable
100% charged Disconnect from power supply
LED Status Status Action
Alternating green and orange when
power button is pressed 3 times in
5seconds
Discoverable mode
Pair smart transmitter with
mobile device
Does not blink when power button
is pressed
Smart transmitter o
Hold down power button for
5seconds to turn on
Blinks green (once) when power button
is pressed
10% - 90% battery power No immediate action required
Blinks orange (once) when power button
is pressed
Low battery, less than 10%
battery power remaining
Charge battery soon
LED is orange for one minute An alert has been triggered
Check the app on your mobile
device to understand the alert
• During smart transmitter use:
LED Status Indicators
The smart transmitter communicates several dierent states based upon the color of the LED.
LBL-0302-01-101 Rev 1_Eversense User Guide_mmolL_R5.indd 40 11/4/16 2:44 PM