Instructions / Assembly

INSTALL SENSI BASE
Mount the Sensi base using the supplied screws,
drilling new holes and inserting wall anchors, if
necessary. Carefully pull your wires through the
center opening.
Install New Thermostat Base (Sensi 1.5)
Screws
W/E
Y
C
G
CONNECT THE WIRES
Using your screwdriver, loosen the terminal block
screw, insert the corresponding wire and tighten
the terminal screw. You can check your terminal
connection by giving the wire a gentle tug.
Connect Corresponding T-stat Wires
W/E Y G C
W/E
Y
G
C
19
18