Installation Guide

Flexible 16.4’ (5 Meter) 24W 300 Diode
IP65\Strip Light
Installation
Sensio America
877-501-5337
www.sensioamerica.com
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth
periodically.
• Do not use harsh chemical solvents, it may discolor or
damage the finish.
Maintenance & Care
Support
Drill 5/16" hole in bottom front
corner.
1
12
Connect driver to power.
Connect to driver.
10
Staple wire in place along inside
front edge of cabinet (optional).
11
Determine placement (front,
center, or back) and use pencil to
draw line.
2
Measure line drawn. Clean surface
with rubbing alcohol and let dry.
3
Feed driver lead wire through hole up
along inside front corner of cabinet.
8
Adhere strip along line, driver lead
on side of drilled hole.
7
Feed driver lead to LED driver.
9
Attach driver lead into strip.
5
Cut excess plastic off, cut strip on
scissor line indicator.
4
Peel off backing.
6
(FRONT OF CABINET)