Installation Guide

SLS LED Recessed/Surface Mount Puck Light
1
Drill a 2 3/8” (60mm) hole
2
Feed driver lead through hole
3
Press lamp into hole (go to step 5)
A) Recess Mount for Inside Cabinet Top or Double-Walled Cabinet Bottom
1
Drill a 3/8”-7/16” (9-10mm) hole for
driver lead
Mount fixture ring with screws
2
3
Thread lead through hole (go to step 4)
B) Surface Mount Cabinet Top
C) Surface Mount Cabinet Bottom
Mount fixture ring with screws (go to step 4)
Thread driver lead through lead notch
1
Sensio America
877-501-5337
www.sensioamerica.com
• Ensure that the power is disconnected prior to cleaning.
• To keep the finish of this product, wipe over with soft cloth
periodically.
• Do not use harsh chemical solvents, it may discolor or
damage the finish.
Maintenance & Care
Support
4
Press lamp into ring
5
Run lead to driver
LED Power
Supply
Distributo
r
6
Connect driver to power
Final Steps (FS)
Mounting Options
2