User's Manual

TSX USER MANUAL 3 (7)
Version 0.7 20.1.2021
Sensire Oy, Rantakatu 24, 80100 Joensuu, Finland
Tel. [phone] | [e-mail] | www.sensire.com
2.3 HOW TO STORE AND CLEAN THE TSX SENSOR
When placing the sensor inside the desired location make sure that it will move around as
little as possible. This ensures measurement precision and prevents fall/other damage.
Best way to secure sensor is to use TSX wall holder.
Figure 2. TSX sensor wall holder.
If needed TSX can be cleaned by wiping it with a cloth and a mixture of detergent and
water.
2.4 DISPOSAL OF THE TSX SENSOR
In case that sensor needs to be disposed, it must be sent back to manufacturer or
disposed as WEEE waste. Local regulations must be obeyed when disposing the device.
2.5 RISKS AND HOW TO USE THE TSX SENSOR
To ensure that TSX sensor works properly and that no harm will come to user please make
sure that:
• Do not open or disassemble the device
• Do not replace the batteries
• Handle TSX so it will not be physically damaged
• Stop using TSX if it becomes damaged as it contains lithium batteries
• If damaged return TSX to manufacturer or dispose it to WEEE waste in accordance
with local regulations
• Sensor is cleaned only with mixture of detergent and water, do not use solvent
• If sensor is warm do not touch it. It might be damaged. Please contact
manufacturer at [e-mail]
• Note! If the device is used in a manner not specified in this manual and product
specification the protection provided by the device may be impaired!
This device 2.4 GHz SRD feature is not
allowed to be used within a 20 km
radius of the centre of Ny-Ålesund at
Svalbard, Norway.