User's Manual

ManualsBrandsSensitech ManualsElectronicsTemp/Humidity Data Logger / Tracker

USER MANUAL

For

LTE CAT-M/2G Temperature Tracker, Non-Lithium

LTE CAT-M/2G Air Temperature Tracker, Non-Lithium

LTE CAT-M/2G Air Probe Temperature Tracker, Non-Lithium

LTE CAT-M/2G Air Probe Temperature Tracker, Extended

LTE CAT-M/2G Temperature Tracker, Extended

LTE CAT-M/2G Air Temperature Tracker, Extended

NOTICE OF PROPRIETARY PROPERTY

This document and the information contained in it are the proprietary property of Sensitech. It may not be copied or used

in any manner nor may any of the information in or upon it be used for any purpose without the express written consent of

an authorized agent of Sensitech Inc.

Summary of content (10 pages)

PAGE 1
USER MANUAL For LTE CAT-M/2G Temperature Tracker, Non-Lithium LTE CAT-M/2G Air Temperature Tracker, Non-Lithium LTE CAT-M/2G Air Probe Temperature Tracker, Non-Lithium LTE CAT-M/2G Air Probe Temperature Tracker, Extended LTE CAT-M/2G Temperature Tracker, Extended LTE CAT-M/2G Air Temperature Tracker, Extended NOTICE OF PROPRIETARY PROPERTY This document and the information contained in it are the proprietary property of Sensitech.
PAGE 2
REVISION HISTORY: REV 3 3.1 3.2 3.
PAGE 3
Table of Contents 1. 2. 3. 4. 5. Introduction .................................................................................................................. 4 1.1. Purpose ............................................................................................................ 4 1.2. Scope................................................................................................................ 4 1.3. Description ...............................................................................
PAGE 4
1. Introduction 1.1. Purpose This document describes the usage of a TEMPTALE GEO/VIZCOMM VIEW- LTE/LTE EXTENDED, ULTRA/ ULTRA EXTENDED, ULTRA DRY ICE/ ULTRA DRY ICE EXTENDED device. 1.2. Scope The intended audience is a valued customer. 1.3. Description LTE CAT-M/2G Air Probe Temperature Tracker, Extended/LTE CAT-M/2G Temperature Tracker, Extended/LTE CAT-M/2G Air Temperature Tracker, Extend is a LTE-M/2G GSM Quad band tracking device, and sensor data logger designed for the transportation industry.
PAGE 5
1.4. Radio Frequency Characteristics 1.4.1. Operating Frequencies LTE-FDD: B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B26/B28 LTE-TDD: B39 (for LTE CAT-M only) GSM: GSM850/900/1800/1900 CE: Bands 46A/47/48/50/54/56B NFC: 13.56MHZ (only used for secondary download of sensor data) 1.4.2. TRP/TIS Cellular Maximum Conducted TRP: TBD Cellular Minimum Conducted TIS: TBD © SENSITECH INC.
PAGE 6
2. Physical Appearance 2.1. User Interface The user interface consists of the following: 1. Six LEDs (2 sets of red, green, blue) 2. Two buttons(Start/Status) 2.1.1. LEDs The LEDs are intended to allow quick and easy-to-read status to be conveyed to the end user. The user can immediately know the status of the unit during startup and operation. 2.1.1.1. System Startup Sequence During startup, the Blue LED will blink rapidly.
PAGE 7
3. Using the Device 3.1. Starting the device: To start the device, press the START button. If the Start Key feature is enabled, the START button must be held down for 3 seconds. The device may only be started from sleep mode. 3.2. Stopping the device: To stop the device, press the START button. If the Stop Key feature is enabled, the START button must be held down for 5 seconds to stop. 3.3. Status Check the device: To check the status of the device, press the STATUS button.
PAGE 8
4. Software This unit reports data over the cellular network. This data is accessible via several web-based platforms that target various industries. Please contact customer support for more information. © SENSITECH INC.
PAGE 9
5. Disclaimers Risk of Fire Hazard if battery is not charged in accordance with manufacturer’s instruction. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Do not dispose battery along with household waste. There are no user serviceable parts inside, battery cannot be replaced by the end user, and will result in damaging device.
PAGE 10
15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 5.2. IC- pending Canadian Notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s).